Table of Contents
Advertisement
A
A
WARNING:
Battery tools are always in operating
condition. Therefore, switch should always be locked
when not in use or carrying at your side.
CAUTION:
The metal surface may become hot dur-
ing use. Avoid contact with it to avoid possible burn
injury.
SWITCH
TRIGGER
See Figure 4.
To turn the tool ON, depress the switch trigger. To turn it
OFF, release the switch trigger.
VARIABLE
SPEED
See Figure 4.
The variable speed switch trigger delivers higher speed
with increased trigger pressure and lower speed with de-
creased trigger pressure.
NOTE: You might hear a whistling or ringing noise from
the switch during use. Do not be concerned; this is a nor-
mal part of the switch function.
FORWARD
\
SWITCH
TRIGGER
Fig. 4
DIRECTION
OF ROTATION
SELECTOR
(FORWARD/REVERSE/CENTER
LOCK)
See Figure 4.
The direction of bit rotation is reversible and is controlled
by a selector located above the switch trigger. With
the impact driver held in normal operating position, the
direction of rotation selector should be positioned to the
left of the switch trigger for driving. The driving direction
is reversed when the selector is to the right of the switch
trigger.
Setting the switch trigger in the OFF (center lock) position
helps reduce the possibility of accidental starting when not
in use.
CAUTION:
To prevent gear damage, always allow
the coupler to come to a complete stop before
changing the direction of rotation.
To stop the impact driver, release the switch trigger and
allow the coupler to come to a complete stop.
NOTE: The impact driver will not run unless the direction
of rotation selector is pushed fully to the left or right.
BUILT-IN
COUPLER
See Figure 5.
The tool has a built-in coupler. The coupler has been
designed to accept 1/4 in. hex bits.
COUPLER
Fig. 5
LED WORKMGHT
See Figure 6.
The LED worklight, located below the coupler, illuminates
when the switch trigger is depressed. This provides addi-
tional lighting on the surface of the workpiece for opera-
tion in lower-light areas.
LED
WORKLIGHT
Fig. 6
12
Advertisement
Table of Contents
