1. Manuals
  2. Brands
  3. Craftsman Manuals
  4. Drill
  5. evolv 320.30856
  6. Operator's manual

Craftsman evolv 320.30856 Operator's Manual

18.0-volt ni-cd cordless 3/8 inch reversible drill/driver
Hide thumbs
Table of Contents

Advertisement

Quick Links

Operator's
Manual
II:RAFTSMANI
evolv
m
18.0-Volt Ni-Cd Cordless
3/8 inch Reversible Drill/Driver
Model No. 320. 30856
c( us
LISTED
WARNING:
To reduce the risk of
injury, the user must read and
understand
the Operator's
Manual
before using this product.
Charge
battery before first use.
• WARRANTY
• SAFETY
• ASSEMBLY
• OPERATION
• MAINTENANCE
• ESPAI_IOL
Sears Brands Management
Corporation,
Hoffman Estates, IL 60179 U.S.A.
www.oraftsman.oom

Advertisement

Table of Contents
loading

Related Manuals for Craftsman evolv 320.30856

Summary of Contents for Craftsman evolv 320.30856

  • Page 1 Operator's Manual II:RAFTSMANI evolv 18.0-Volt Ni-Cd Cordless 3/8 inch Reversible Drill/Driver Model No. 320. 30856 c( us LISTED • WARRANTY WARNING: To reduce the risk of • SAFETY injury, the user must read and • ASSEMBLY understand the Operator's Manual •...
  • Page 2 Exploded View and Part List pages 25-26 CRAFTSMAN EVOLV ONE YEAR LIMITED WARRANTY FOR ONE YEAR from the date of purchase, this product is warranted against any defects in material or workmanship. With proof of purchase, a defective product will be replaced free of charge.

  • Page 3: Safety Symbols

    The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention...
  • Page 4 SAVE THESE INSTRUCTIONS Some of these following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and more safely. SYMBOL NAME DESIGNATION/EXPLANATION Volts Voltage Amperes...

  • Page 5: Work Area Safety

    GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions listed below may result in electric shock, fire, and/ or serious personal injury. Save all warnings and instructions for future reference. The term "power tool"...

  • Page 6: Personal Safety

    PERSONAL SAFETY • Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use the tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.
  • Page 7 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Use the power tool, accessories, tool bits, etc., in accordance with these instructions, taking into account the working conditions and the...
  • Page 8 • Use auxiliary handle, if supplied with the tool. Loss of control can cause personal injury. • Secure the workpiece. Clamping devices or a vise will hold the workpiece place better than the hand. • Always wait until the machine has come to a complete stop before placing it down.
  • Page 9 SAFETY RULES FOR POWER UNIT _1, WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. Before using the power unit, read all instructions and cautionary markings this manual, on the power unit, and the product using battery to prevent misuse of the products...

  • Page 10: Important Safety Instructions

    • Do not operate the power unit with a damaged cord or plug, which could cause shorting and electric shock, if damaged, have the cord and plug repaired or replaced by a qualified service technician. • Do not operate the power unit if it has received a sharp blow, been...
  • Page 11 ID]=_.'_o_[[e_] KNOW YOUR CORDLESS DRILL/DRIVER (Fig. 1) Fig. 1 Two-speed Gearbox Switch Keyless Chuck Torque-Adjustment Ring Direction-of-Rotation Trigger Selector (Forward/ Center LocW Reverse) Worklight Battery-Release Button Power unit Plug PRODUCT SEPCIFICATIONS Motor 18.0 Volt DC No Load Speed LO 0-350/HI 0-1300 (RPM) Chuck 3/8 inch...
  • Page 12 _1, WARNING: The safe use of this product requires an understanding of the information on the tool and in this operator's manual, as well as knowledge the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.
  • Page 13 _h, WARNING: If any parts are broken or missing, do not attach the battery pack to the drill/driver or operate the tool until the broken or missing parts are replaced. Failure to do so could result in possible serious injury. WARNING: Do not attempt to modify this drill/driver...

  • Page 14: How To Charge

    HOW TO CHARGE THE BATTERY PACK (Fig. 2} Detach the battery pack from the drill/driver. Insert the power unit jack into charging socket, making sure Fig. 2 they are properly connected. Power unit can be used with Charging socket normal house voltage of 120 volts, 60 Hz, AC only.
  • Page 15 TO DETACH BATTERY PACK (Fig. 3} Lock the trigger switch on the drill/driver by placing the direction-of-rotation (forward/center-lock/reverse) selector in center position. Depress the battery release buttons located on the front of the battery pack to release the battery pack. Pull forward on the battery pack to remove it from the tool.

  • Page 16: Two-Speed Gearbox

    NOTICE: This drill/driver Keyless chuck Fig. 5 equipped with an electric brake. When the brake is functioning OPEN (release) properly, sparks may be visible Chuckjaws through the vent slots in the housing. This is normal and results from the action of the Chuck body-- brake.

  • Page 17: Adjustable-Torque

    ADJUSTABLE-TORQUE CLUTCH (Fig. 7) The torque clutch can be adjusted to 24 different settings. Fig. 7 To decrease torque The higher the torque setting, the more force the drill/driver produces to turn an object in either LO or HI rotation speed. To increase torque When using the drill/driver...

  • Page 18: Led Worklight

    LED WORKLIGHT (Fig. 9) The LED worklight, located on Fig. 9 the base of the drill/driver, will illuminate when the trigger switch ight is depressed. This provides additional light on the surface of the workpiece for operation lower-light areas. The LED worklight will turn off when the trigger switch is released.

  • Page 19: Wood Drilling

    DRILLING (Fig. 12} Fig. 11 Wrong! Check that the direction- of-rotation selector is set to Forward. Secure the material to be drilled in a vise or with clamps to keep it from turning as the drill bit rotates. Hold the drill/driver firmly, and place the bit at the point to be drilled.

  • Page 20: Metal Drilling

    METAL DRILLING For maximum performance, use high speed steel bits for metal or steel drilling. When drilling metals, use light oil on the drill bit to keep it from overheating. The oil will prolong the life of the bit and increase the drilling action. Begin drilling at a very low speed to prevent the bit from slipping off the starting point.

  • Page 21: General Maintenance

    WARNING: When servicing, Fig. 13 use only identical replacement parts. Use of any other parts key-less chuck may create a hazard or cause product damage. Mallet GENERAL MAINTENANCE Avoid using solvents when cleaning plastic parts. Most plastics are susceptible damage from various types of Chuck Jaws commercial solvents...
  • Page 22 Insert a 5/16 inch or larger hex key into the chuck of the drill/driver tighten the chuck jaws securely. Tap the hex key sharply with a mallet in a clockwise direction. This will loosen the screw in the chuck for easy removal. Open the chuck jaws and remove the hex key.

  • Page 23: Battery Pack Removal

    BATTERI ES: The battery pack is equipped with nickel-cadmium rechargeable batteries. The duration of use from each charge will depend on the type of work performed. The batteries in this tool have been designed to provide maximum trouble- free life. Like all batteries, they will eventually wear out.
  • Page 24 PROBLEM CAUSE SOLUTION The drill/driver does not Battery is depleted work Charge the battery Bit cannot be installed Chuck is not open Open the chuck Be sure cooling vents Clean, clear vents. Do are free from saw dust not cover with hand Motor overheating and obstacles during operation...
  • Page 26 3321267000 Left Housing Assembly 3700961000 Stop Spring 3126128000 Speed Change Button 2790267000 Motor and Gear Case Assembly 3126131000 Clutch Indicator Ring 3126129000 Clutch Cap 3123494000 Spring Holder 3704024000 Mounting Plate 5610013000 Screw 3860086000 Chuck 5620179000 Screw (L.H.) 3321268000 Right Housing Assembly 5700178000 steel ball 3660466000...
  • Page 27 I_[e]li_l 30856 Manual Revised 11-0623 Page 27...
  • Page 28 I_[e]li_l 30856 Manual Revised 11-0623 Page 28...

Table of Contents