Return Codes For Hitachi Command Suite Common Agent Component - Hitachi XP P9500 User Manual

Message ID
KAPL15110-
E
KAPL15111-
W
KAPL15401-I HDLM Manager successfully started.
KAPL15402-
E
KAPL15403-I HDLM Manager successfully stopped.
KAPL15404-
W
Return Codes for Hitachi Command Suite Common Agent
Component
When an operation requested of HDLM from Global Link Manager terminates
abnormally, or terminates normally with a warning, HDLM outputs one of the
return codes described below.
Message ID
1002
1003
1004
1006
Message Text
An attempt to display information about
HDLM-management targets has failed.
Command Line = aa...aa
The HDLM command was started or
stopped by the user who does not have
the authority. Command Line = aa...aa
Could not start the HDLM manager.
The HDLM Manager was executed by the
user who does not have the authority.
Details
There is no path on which the operation can be performed.
Action
Refresh the host information, check the path status, and
then perform the operation again.
Details
No path was detected.
Action
Check whether a path between the host and the storage
system is connected. If a path is connected, check whether
HDLM is configured correctly.
Details
Memory required for HDLM internal processing could not be
allocated.
Action
Terminate unnecessary applications to increase free
memory, or restart the host.
Details
An Offline path cannot be placed Online.
Action
Messages
Hitachi Dynamic Link Manager User Guide (for AIX(R))
Explanation
Details
aa...aa: Command that the
user executed
Details
aa...aa: Command that the
user executed
Explanation
8-113