Hitachi XP P9500 User Manual page 239

#
When you use cluster software, the settings of the cluster support
function and the product name of the cluster software is not
displayed. However, the cluster support function will operate
normally.
Examples
Example 1
The following example shows how to display information about the HDLM
function settings:
# /usr/DynamicLinkManager/bin/dlnkmgr view -sys -sfunc
HDLM Version
Service Pack Version
Load Balance
Support Cluster
Elog Level
Elog File Size(KB)
Number Of Elog Files
Trace Level
Trace File Size(KB)
Number Of Trace Files
Path Health Checking
Auto Failback
Intermittent Error Monitor
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
#
Example 2
The following example shows how to display information about the HDLM
manager.
# /usr/DynamicLinkManager/bin/dlnkmgr view -sys -msrv
HDLM Manager
Alive
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
#
Example 3
The following example shows how to display information about the HDLM
alert driver.
# /usr/DynamicLinkManager/bin/dlnkmgr view -sys -adrv
HDLM Alert Driver Ver
Alive
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
#
Example 4
Hitachi Dynamic Link Manager User Guide (for AIX(R))
: x.x.x-xx
:
: on(extended lio)
:
: 3
: 9900
: 2
: 1
: 1000
: 4
: on(30)
: on(60)
: off
Ver WakeupTime
x.x.x-xx yyyy/mm/dd hh:mm:ss
WakeupTime
x.x.x-xx yyyy/mm/dd hh:mm:ss 4000
Command Reference
ElogMem Size
6-37