Hitachi XP P9500 User Manual page 341

Message ID
KAPL05008- Could not allocate memory. (aa:bb)
E Execute the DLMgetras utility to collect
error information, and then contact your
vendor or maintenance company. Refer
to the HDLM User's Guide for instructions
how to execute the DLMgetras utility.
KAPL05011- Could not attach the HDLM driver (filter
E component) to Disk (aa), Partition (bb).
(cc:dd) Execute the DLMgetras utility to
collect error information, and then
contact your vendor or maintenance
company. Refer to the HDLM User's
Guide for instructions how to execute the
DLMgetras utility.
Hitachi Dynamic Link Manager User Guide (for AIX(R))
Message Text
Messages
Explanation
sequence number) and
Partition (bb...bb: Fixed
at 0) was successfully
registered in the core
logic.
Action
None.
Details
The OS memory allocation
function was started but
an error was returned from
the memory allocation
function.
aa...aa: Number of
program lines
bb...bb: Memory capture
size
Action
Check whether the HDLM
driver has started
normally. If it has not
started or contains an
error, execute the
DLMgetras utility for
collecting HDLM error
information, and then
contact your HDLM vendor
or the maintenance
company if there is a
maintenance contract for
HDLM. For details on the
DLMgetras utility, see
DLMgetras Utility for
Collecting HDLM Error
Information on page
Details
Registration of the path
corresponding to Disk
(aa...aa: physical volume
(hdisk) decimal sequence
number) and Partition
(bb...bb: Partition decimal
number) failed in the core
logic.
cc...cc: Error code
(hexadecimal number)
dd...dd: Filter driver
management table address
(hexadecimal number)
Action
Check whether the HDLM
driver has started
7-4.
8-39