Hitachi XP P9500 User Manual page 473

Message ID
KAPL01056-I If you are sure that there would
be no problem when all the
paths which pass the specified
aa...aa are placed in the
Offline(C) status, enter y.
Otherwise, enter n. [y/n]:
KAPL01057-I All the paths which pass the
specified aa...aa will be changed
to the Online status. Is this OK?
[y/n]:
KAPL01058-W The specified parameter value is
not needed. Operation name =
aa...aa, parameter = bb...bb,
parameter value = cc...cc
KAPL01059-W Cannot specify the parameter
aa...aa at the same time if you
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Message Text
Messages
Explanation
y. If you want to terminate
processing, enter n.
Details
This message re-asks the user
whether they want to set all the
paths to Offline(C). To set all the
paths to Offline(C), enter y. To
cancel the operation, enter n.
aa...aa: CHA port or HBA
Action
If you want to execute offline
processing for the paths that meet
the specified requirements, enter
y. If you want to terminate
processing, enter n.
Details
All multiple paths will place online
status because the -hba or -cha
parameter was specified. To
continue this operation, enter y.
To discontinue this operation,
enter n.
aa...aa: CHA port or HBA
Action
If you want to execute online
processing for the paths that meet
the specified requirements, enter
y. If you want to terminate
processing, enter n.
Details
A parameter value was specified
in a parameter that does not need
a parameter value.
aa...aa: clear, offline, online,
set, or view
bb...bb: Parameter name
cc...cc: Parameter value
Action
Execute help operation-name of
the HDLM command (dlnkmgr) to
check the parameter and
parameter value, and then retry.
For details on the help operation,
see help (Displays the Operation
Format) on page 6-4.
Details
8-13