Hitachi XP P9500 User Manual page 206

Figure 3-15 Example of Editing /etc/lvm/lvm.conf file
Comment out the existing filter and types lines, and add the shaded
lines in the figure.
In addition, set md_component_detection to its original value before
installation.
8 Edit the boot loader configuration file so that the OS will start with a SCSI
.
device specified.
Edit the boot loader configuration file as shown in Figure 3-16 Example of
Editing /etc/grub.conf file on page 3-139, Figure 3-17 Example of
Editing /boot/grub/menu.lst file (When using a kernel that supports Xen)
on page 3-139, and Figure 3-18 Example of Editing /etc/elilo.conf file on
page 3-140.
If you are using SUSE LINUX Enterprise Server 10 or SUSE LINUX
Enterprise Server 11, check the /boot/grub/menu.lst file instead of
the /etc/grub.conf file.
The detailed procedure is explained in steps 9 to 13.
Figure 3-16 Example of Editing /etc/grub.conf file on page 3-139, Figure
3-17 Example of Editing /boot/grub/menu.lst file (When using a kernel
that supports Xen) on page 3-139, and Figure 3-18 Example of Editing /
etc/elilo.conf file on page 3-140 show examples of editing the
configuration file.
3-138
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Linux(R))