JVC GZ-MG630 Manual Book page 66

Troubleshooting
(Continued)
• Slide the mode switch to select the desired mode (_ or a).
• If the camcorder temperature increases, REC flashes in the LCD
monitor and recording stops automatically to protect the HDD.
Turn off the camcorder, wait for a while, and start recording again.
• Move away from a place where the camcorder is affected by
excessive sound or vibration (such as a concert hall).
• A malfunction may occur in the HDD of the camcorder. In this
case, record to a microSD card.
• Insert a commercially available microSD card, and set each of
the [REC MEDIA FOR VIDEO] and [REC MEDIA FOR IMAGE] to
[SO].
• Recording stops automatically after 12 hours of continuous
recording.
• Use backlight compensation.
• Set [GAIN UP] to [AGC] or [AUTO].
• Use [NIGHT] from scene select.
• Set the brightness to the [+] side.
• Set the backlight compensation to [OFF] if it is being used.
• Set the brightness to the [-] side.
• Change [ZOOM] to [80X/DIGITAL] or [800X/DIGITAL].
• Digital zoom is not available in the still image recording mode.
• Wipe the lens with lens cleaning cloth.
• If you are recording in a dark place or a subject that has no
contrast between dark and light, adjust the focus manually.
• Set [WB] in [MANUAL SETTING] appropriately to the light source.
• Select [MWB] in [WB] while holding a sheet of plain white paper
in front of the camcorder so that the white paper fills the screen.
Keep touching OK until the 1:_ indicator appears.
• This cannot be used if [SEPIA] or [MONOTONE] are selected as
effects.
• Do not use [TWILIGHT] from scene select.
• The continuous shooting speed will drop after continuous shots.
• Continuous shooting speed may drop depending on the recording
media or under certain recording conditions.
• This occurs when there is a bright light source near the
camcorder. This is not a malfunction. Change the direction of the
camcorder to prevent the light source comes into view.
66 EN