JVC GZ-MG630 Manual Book page 47

[] To play back the created disc using the
camcorder
1 ) Connect the camcorder to the DVD
burner.
2) Turn on the camcorder first, then turn on
the DVD burner.
3) Select [PLAYBACK].
4) Select the desired folder.
5) Select the creation date of the disc.
6) Select the desired file. To return to the
previous screen, select _:3.
[] Disc number
Disc number shows the number of DVD
discs you can create. The dubbing range
of each disc is automatically allocated,
presuming that all the files are to be dubbed
from the first one on the list. This dubbing
range cannot be changed.
E.g.) "DVDI" can contain two files,
"JAN.01.2009" and "JAN. 15.2009".
[] Title and chapter of created DVD
Each recording date becomes one title in
a created DVD and each file recorded in a
same day becomes one chapter in the title.
Jan. 10.2009: file 1 and 2 were recorded.
Jan. 11. 2009: file 3 and 4 were recorded.
._,._ Create a DVD
Title
i File1 ! File2 I FileS I File4
I
Chapter
Digest Playback i
You can view a few seconds from the
beginning of each video (digest) in the created
DVD.
Create a DVD using a DVD burner (CU-VDS0/
CU-VD3).
| Load the created DVD on the DVD
player.
2 On theTV, select [DIGEST PLAYBACK].*
You can view the previous or next page by
selecting < / >.
* The screen does not appear on the
camcorder.
3 The digest is played back
continuously.
[] To normal playback/To the index menu
1) Press the top menu button on the remote
control of the DVD device during the
digest playback.
2) Select the desired item.
• "Digest Playback" menu is not available
when DVD is burned using the provided
MediaBrowser software.
• In some cases, parts of video other than the
beginning may be played back.
• Some video may not be played back at all.
EN
47