JVC GZ-MG630 Manual Book page 33

Operating in Conjunction with TV via HDMI
Connecting the camcorder to an HDMI-CEC-
enabled TV using the HDMI cable allows you
to utilize the following convenient functions.
Operation method 1
• HDMI-CEC (Consumer Electronics Control)
is an industry standard that enables
interoperability between HDMI-CEC
compliant devices that are connected via
HDMI cables.
• Not all HDMI-control devices comply with
the HDMI-CEC standard. The HDMI control
function of the camcorder will not work when
connected to these devices.
• The camcorder is not guaranteed to operate
with all HDMI-CEC-enabled devices.
• Depending on the specifications of each
HDMI-CEC-enabled device, some functions
may not work with the camcorder. (For
details, refer to the instruction manual of your
TV.)
• Unintended operations may occur with some
connected devices. In these cases, set
[HDMI CONTROL] to [OFF].
Preparation:
• Connect an HDMI cable between the
camcorder and the TV. (_7" p. 31 )
• Turn on the TV and set the HDMI-CEC
related setting to on. (For details, refer to the
instruction manual of the TV.)
• Turn on the camcorder and set [HDMI
CONTROL] to [ON]. (_7" p. 63)
Turn on the camcorder.
Select the playback
mode.
3_ Connect the HDMI
cable.
m Operation method 2
TV turns on
automatically and
switches to HDMI
input mode when the
camcorder is turned
on.
Turn off the TV. The camcorder turns
off automatically.
m Operation method 3
• Depending on the TV connected, the display
language of the camcorder will automatically
switch to the language that is used for the TV
when the camcorder is turned on.
(This is applicable only if the camcorder
supports the language selected for the TV.)
To use the camcorder with a language that
differs from the display language of the TV,
set [HDMI CONTROL] to [OFF].
• The display language of the TV will not
switch automatically, even if the display
language of the camcorder is changed.
• These functions may not work correctly when
devices such as amplifier and selector are
connected. Set [HDMI CONTROL] to [OFF].
• If HDMI-CEC does not work properly, turn off
and on the camcorder again.
EN
33