Troubleshooting - Cub Cadet 17WI2ACP056 Operator's Manual

Troubleshooting
Problem
Excessive vibration
Uneven cut
Mower will not mulch grass
(If Equipped w/Mulching Kit)
2.
1.
2.
3.
1.
2. Wet grass.
3. Excessively high grass,
4. Dull blade.
Cause
Cutting blade loose or unbalanced. 1.
Damaged or bent cutting blade. 2.
Deck not leveled properly. 1.
Dull blade. 2.
Uneven tire pressure. 3.
Engine speed too low. 1,
2.
3.
4.
Remedy
Tighten blade and spindle.
Replace blade.
Perform side-to-side deck adjustment.
Sharpen or replace blade.
Check tire pressure in all four tires.
Place throttle in FAST (rabbit) position.
Do not mulch when grass is wet.
Mow once ata high cutting height, then
mow again at desired height or make a
narrower cutting swath.
Sharpen or replace blade.
31