Table of Contents
Advertisement
1
Press the keys shown at right.
PRIORITY CALL # will appear in the
display.
2
Press 1 to enter a number, or 2 to clear
a number. (If you pressed 2, go to Step
4.)
3
Enter the phone number, including the
area code, by pressing the number keys
(max. of 20 digits).
4
Press the START/MEMORY key and
then the STOP key.
Blocking voice calls
With Caller ID turned on, you can use the Anti Junk Fax function
described in Blocking Reception of Unwanted Faxes in this chapter to
prevent voice calls as well as fax receptions (the Anti Junk Fax
function can normally only prevent faxes).
In this case when a voice call or a fax transmission comes in from a
number you have specified as a "Junk Number", your fax will
terminate the call as soon as it receives the calling phone number from
the caller ID service. The caller will hear a 3 second high pitch tone to
signal the calls termination. In Australia the call will not break off
until the caller has hung up.
To use this function, set Option Setting 11 to YES as described in
Chapter 8, Option Settings, and then enter the number in the Anti Junk
Number List as explained in Blocking Reception of Unwanted Faxes
in this chapter.
Note: This function cannot be used if you are using Distinctive Ring.
FUNCTION
3
1
2
or
5
5
5
1
STOP
START/MEMORY
Caller ID
2
3
4
(Example)
95
Advertisement
Table of Contents
