Sharp AR-P17 Software setupg guide Software Setup Manual page 11

INSTALLING THE PPD FILE
USING THE MACHINE AS A NETWORK PRINTER
•
•
If you are running Windows 2000IXP
and a warning message appears
regarding the Windows logo test or
digital signature, be sure to click
"Continue Anyway" or "Yes".
!CDcautionl
Click the "Next" button.
Begin installation of the printer driver.
If you installed the PS printer driver,
the PS displayfont can be installed
from the "PRINTER UTILITIES"
CD-ROM that accompanied the PS3
expansion kit. (p.23)
This completes the installation of the
software.
• After installation, see "CONFIGURING THE
PRINTER DRIVER" (p.25) to check the
printer driver settings .
• To install the Printer Status Monitor or Printer
Administration Utility, see the following
pages:
8rintercStatus.Monitor:.p.t2 •••.
Printer Administration Utility: p.13
Select whether or not you wish the
printer to be your default printer and
click the "Next" button.
If you are installing multiple printer drivers,
select the printer that you wish to use as
your defauit printer.
if you do not wish to set either printer
driver as the default printer, select "No".
After the installation, a message
prompting you to restart your
computer may appear. In this case,
click the "Yes" button to restart your
computer.
J
When "The installation of the SHARP
software is complete" appears, click
the "OK" button.
III
Click the "Close" button.
IP ,,~j,,' ].I4C oddte,
"J:':oU11" DJ(j(jIFB.''JAV
To use the PS printer driver, the PS3
expansion kit must be installed.
A confirmation window appears. Check
the contents and then click the "Next"
button.
If the machine is not found, makesure
that the machine is powered on and
connected to your computer and then
search again. If the machine is still not
found, use the custom installation
procedure to directly specify the IP
address (p.10).
(B"c1~
Conool
When the printer driver selection
window appears, select the printer
driver to be installed and click the
"Next" button.
Select the checkboxes of the printer
drivers to be installed.
• Printers connected to the network are
detected. Select the machine and click
the" Next" button.
Read the message in the window that
appears and click the "Continue"
button.
Begin installation of the PPD file.
After the installation, a message
prompting you to restart your computer
will appear. Click the "OK" button and
restart your computer.
• The License Agreement window will
appear. Make sure that you understand
the contents of the license agreement,
and then click the "Yes" button.
This completes the installation of the PPD
file.
SHARP
[oncel
jus EogllSll : I
Iln'loll ;
I
Insert the printer expansion kit AR-P17
Software CD-ROM into your computer's
CD-ROM drive.
Double-click the "MacOS" folder.
Double-click the CD-ROM icon
«.»
on
the desktop.
Double-click the "Installer" icon (~ ).
The installer window will appear.
.
..
Copy,,~lrt lel :'[I{l~ SHARP CORPORAJlON All nghl, "''''''d
C?r,!.o!~
if a malfunction occurs dueto the installation of screen fonts, deletethe fonts from the system.
INSTALLATION IN MAC OS 8.6 - 9.x
INSTALLING THE SCREEN FONTS (Mac OS 8.6 - 9.x)
The screen fonts for Macintosh are contained in the "Font" folder of the PS3 expansion kit AR-PK1
PRINTER UTILITIES CD-ROM. install the screen fonts as needed. The screen fonts are instalied by
copying the required screen font suitcase folders to your Macintosh.
Copy the screen fonts to the following foider:
• Mac OS 8.6 to g.x: "Fonts" folder in the "System Folder"
IiI
Click the "Install" button.
I,,,
Driver
,~w""
32 9