Answering On An Extension Phone - Sharp FO-51 Operation Manual

Answering on an extension phone

1
Answer the extension phone when it
rings.
2
If you hear a soft fax tone, wait until your fax responds (the extension
phone will go dead), then hang up.
3
If the fax doesn't respond, or if the other party first talks to you and then
wants to send a fax, press
phone (only on a tone dial phone). This signals the fax to begin
reception. Hang up.
•
The above step is necessary if you have set the Fax Signal Receive setting
(page 44)
•
Your fax will not accept the signal to begin reception (5**) if a document is
loaded in its feeder.
•
In New Zealand, not all standard telephones and answering machines will
respond to incoming ringing when connected to the extension socket of the
equipment.
Beep
Phone goes dead
5
to NO.
once and twice on the extension
Using TEL Mode
43