System Time and Date
The Aggregator auto-configures the hardware and software clocks with the current time and date. If
necessary, you can manually set and maintain the system time and date using the CLI commands described
in this chapter.
•
Setting the Time for the Hardware Clock
•
Setting the Time for the Software Clock
•
Synchronizing the Hardware Clock Using the Software Clock
•
Setting the Time Zone
•
Setting Daylight Savings Time
•
Setting Daylight Savings Time
Setting the Time for the Hardware Clock
To set the time and date for the hardware clock, use the following command:
Command Syntax
calendar set time month day year
Command Mode
Purpose
EXEC Privilege
Set the hardware clock to the current time and date.
•
•
•
•
FTOS#calendar set 12:11:00 21 may 2012
FTOS#
time:
Enter the time in hours:minutes:seconds.
For the hour variable, use the 24-hour format, for
example, 17:15:00 is 5:15 pm.
Enter the name of one of the 12 months in
month:
English.You can enter the name of a day to
change the order of the display to
year
.
Enter the number of the day. Range: 1 to 31.
day:
You can enter the name of a month to change the
order of the display to
time day month year
year:
Enter a four-digit number as the year.
Range: 1993 to 2035.
19
time day month
System Time and Date | 225