Dell PowerEdge M IO Aggregator Command Reference Manual page 110

Mxl 10/40gbe switch io module ftos command reference guide, ftos 8.3.16.1
Hide thumbs Also See for PowerEdge M IO Aggregator:
Table of Contents

Advertisement

Dynamic ACL generation on an Aggregator operating as a FIP snooping bridge functions as follows:
Global ACLs are applied on server-facing ENode ports.
Port-based ACLs are applied on ports directly connected to an FCF and on server-facing ENode ports.
Port-based ACLs take precedence over global ACLs.
FCoE-generated ACLs take precedence over user-configured ACLs. A user-configured ACL entry
cannot deny FCoE and FIP snooping frames.
Figure 8-2
switch operates as an FCF for FCoE traffic. Converged LAN and SAN traffic is transmitted between the
ToR switch and an Aggregator. The Aggregator operates as a lossless FIP snooping bridge to transparently
forward FCoE frames between the ENode servers and the FCF switch.
Figure 8-2. FIP Snooping on an Aggregator
96
|
FIP Snooping
shows an Aggregator used as a FIP snooping bridge in a converged Ethernet network. The ToR

Advertisement

Table of Contents
loading

Table of Contents