Listening To The Radio - Sharp AN-PR1500H Operation Manual

To cancel random playback, press again the SHIFT and RANDOM buttons, so that
the random indicator will disappear.
Notes:
If you press the or button during random play, you can move to the
track selected next by the random operation.
In random play, the unit will select and play tracks automatically. (You cannot select
the order of the tracks.)
If you press the REPEAT button during random play, playback will enter repeat
mode and random will be cancelled.
In random function, playback will continue until
Caution:
After performing repeat, be sure to press the
Otherwise, it will play continuously.
Notes:
This unit only supports "MPEG-1 Audio Layer-3" and "MPEG-2 Audio Layer-3"
format. (Sampling Frequency is 32, 44.1, 48kHz)
"MPEG-2.5 Audio Layer-3" and MP1, MP2 format are not supported.
Playback order for MP3 files may differ sometimes depending on the writing
software used during file download.
Bitrate which is supported by MP3 is 32~320 kbps, WMA is 64~160 kbps.
For MP3/WMA files, please put ".MP3" ".WMA" extension. Files cannot be played
back if there is no MP3/WMA extension.
Playlists are not supported on this unit.
This unit only supports MP3 ID3-Tag version 1.x.
The display playback time may not be displayed correctly when playing back a
variable bitrate file.
Copyright protected WMA files cannot be played back.
button is pressed.
button.

Listening to the radio

Tuning
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER button on the remote control or FUNCTION
button repeatedly on the main unit to select tuner function.
3
Press the TUNING ( or
station.
Manual tuning:
Press the TUNING ( or ) button as many times as required to tune in to the
desired station.
Auto tuning:
When the TUNING ( or ) button is pressed for more than 0.5 seconds,
scanning will start automatically and the tuner will stop at the first receivable
broadcast station.
1 2 3
4 5 6
7 8 9
0 +10
) button to tune in to the desired
AN-PR1500H
49