Table of Contents
Advertisement
STORING, EDITING, AND DELETING AUTO DIAL KEYS AND PROGRAMS
10
If you need to enter a sub-address, touch
the [SUB ADDRESS] key and then enter
the sub-address with the numeric keys.
CANCEL
OK
N PRESS [OK].
PAUSE
SUB ADDRESS
If you wish to enter a passcode, touch the
11
[SUB ADDRESS] key once again and enter
the passcode with the numeric keys.
No. VIA THE 10-KEY PAD, THEN PRESS [OK
0666211221/3456/
Touch the [OK] key.
12
You will return to the one-touch key programming
screen. "REGISTRATION IS COMPLETED" will
appear highlighted to the right of "No.".
NOTE
The "FAX No." line only shows 32 digits, regardless
of how many digits actually programmed.
13
Check the key name.
The characters appearing next to the [KEY NAME]
key will be displayed in the key. Only the first 18
characters of the name entered in step 1 will be
displayed. If you need to change the name that will
be displayed in the key, touch the [KEY NAME]
key.
REGISTRATION IS COMPLETED.
NAME
SHARP CORPORATION
INDEX
USER 3
FAX No.
KEY NAME
SHARP CORPORATION
6-4
When you touch the
[SUB ADDRESS] key, a
slash is entered after the
fax number. Continue by
entering
the
sub-
address (max. 20 digits).
If you do not wish to
enter
a
passcode,
proceed to step 12.
When you touch the
[SUB ADDRESS] key, a
slash is entered after the
sub-address. Continue
by
entering
the
passcode
(max.
20
digits).
If you do not wish to
change the name, this
step is not necessary.
Refer to page 6-15 for
the
procedure
for
entering characters.
14
Check the transmission settings.
The initial transmission settings are "TRANSMISSION
SPEED:
33.6
kbps"
CORRESPONDENCE MODE: NONE". To change
either of the settings, touch the [MODE] key.
RATION
INITIAL
FAX No.
0666211221/3456/987654
MODE
33.6 kbps/NONE
RATION
Transmission speed
Speed selections are 33.6 kbps, 14.4 kbps, 9.6
kbps, and 4.8 kbps. The higher the number, the
faster the transmission speed.
NOTE
Set the transmission speed only when you know
what speed is most suitable, such as when you are
sending a fax to a foreign country and telephone line
conditions are bad. If you do not know the line
condition, do not change this setting.
International correspondence mode
Selections are NONE, MODE 1, MODE 2, and
MODE 3.
NOTES
G When sending a fax to a foreign country,
telephone line conditions can sometimes distort
the fax or interrupt the transmission. Selecting the
right international correspondence mode can help
alleviate these problems.
G If errors frequently occur when sending a fax to a
foreign country, try each of modes 1 to 3 and select
the mode that enables the best transmission.
When you have finished programming the
15
one-touch key, touch the [EXIT] key.
If you wish to program another one-touch
key, touch the [NEXT] key.
NEXT
EXIT
INITIAL
S
.
0666211221/3456/987654
MODE
33.6 kbps/NONE
and
"INTERNATIONAL
If you do not wish to
change the settings, this
step is not necessary.
After touching the [MODE]
key, you can change either
of the two settings. When
finished, touch the [OK] key.
Touching the [EXIT] key
returns you to the screen
of step 4 on page 6-2.
Touching the [NEXT]
key returns you to the
screen of step 1 on
page 6-3.
Advertisement
Chapters
Table of Contents
