G Using Broadcast Transmission; Using Broadcast Transmission - Sharp AR-FX10 Operation Manual

SENDING THE SAME DOCUMENT TO MULTIPLE DESTINATIONS IN A SINGLE OPERATION (BROADCAST TRANSMISSION)

USING BROADCAST TRANSMISSION

Perform steps 1 through 5 of "BASIC
1
PROCEDURE FOR SENDING FAXES"
(page 2-2).
Dial the fax number of the first destination
2
or touch an auto-dial key (one-touch key
or group key). (Refer to page 2-3.)
SPE
CORPO.TPS
SHARP GROUP
3 Touch the [NEXT ADDRESS] key and then
dial the fax number of the next destination
or touch an auto-dial key.
SE NEXT ADDRESS
CONDITION
SETTINGS
SUB ADDRESS
NOTES
G G G G If you enter an incorrect number
If you make a mistake while entering a number, press
the [C] key and then re-enter the correct digit(s).
If you have already completed entry of a fax number,
you can delete the number using steps 4 and 5.
G G G G If you select an incorrect auto-dial key
Simply touch the incorrect key one more time to
cancel the selection.
G The [NEXT ADDRESS] key only needs to be
touched when successively dialing fax numbers
with the numeric keys
Example:
XXXX NEXT ADDRESS XXXX
Dial
Cannot be omitted.
XXXX NEXT ADDRESS One-touch NEXT ADDRESS One-touch
Dial
Can be omitted.
If desired, you can use the key operator program to
set the machine so that the [NEXT ADDRESS] key
must always be touched (refer to "Must input next
address key at broadcast setting" on page 8-4).
If the condition settings screen
appears, touch the [ADDRESS
DIRECTORY] key to display
the address directory screen.
(See page 1-4.)
An auto-dial key is
highlighted when touched.
Repeat this step for
each of the remaining
destinations.
Dial
Can be omitted.
Touch the [ADDRESS REVIEW] key to
4
display the list of destinations.
CONDITION
SETTINGS
SUB ADDRESS
ADDRESS REVIEW
Check the destinations.
5
SELECT ADDRESS TO DELETE.
ADDRESS REVIEW
0666211221 CORPO.TPS
SHARP GROUP
DELETE THE ADDRESS?
0666211221
NO YES
be deleted from the destination list. To cancel
instead of deleting, touch the [NO] key.
6 Continue from step 7 of "BASIC PROCEDURE
FOR SENDING FAXES" (page 2-3).
NOTE
To cancel a broadcast transmission
To cancel a broadcast transmission when selecting
destinations, press the [CA] key. To cancel after all
steps of the transmission have been completed, see
"CANCELLING A FAX TRANSMISSION" on page 2-6.
When the [ADDRESS
REVIEW] key is
touched, only the
entered and selected
destinations are
displayed.
When you have finished
checking the
destinations, touch the
[OK] key to return to the
screen of step 4.
If you wish to delete a
destination, touch the
displayed one-touch
key. A message will
appear to confirm the
deletion. Touch [YES]
and the destination will
3-3
3