Storage - Cub Cadet 387 Operator's Manual

Storage

Engine to be stored over 30 days should be completely
drained of fuel (gasoline) to prevent gum deposits
forming on essential carburetor parts and fuel system.
WARNING: Gasoline is extremely flammable
and can be explosive under certain conditions.
Drain gasoline before storing the equipment for
extended periods. Drain gasoline in a well-
ventilated area away from any source of flame
or sparks, including any appliances with a pilot
light. Store gasoline in an approved container
in safe location.
• Remove the spark plug cap from spark plug to
prevent accidental starting the engine.
• Empty the fuel from the fuel tank with a pump or
siphon.
• Fit the plug cap on the spark plug securely
• Start and run the engine at idle speed to used up
the fuel in the fuel system.
WARNING: Before maintaining engine, stop
the engine and allow it cool.
• Remove the spark plug and pour approx. 1-2 mL
(0.06-0.1 cu.in) of new engine oil through the plug
hole (A), slowly pull the recoil starter grip several
times and reinstall the spark plug.
A. Spark Plug Hole
• Slowly pull the recoil starter grip until you feel
compression and leave it there.
• Clean every part of the engine.
• After period of storage, change engine oil.
• (Refer to "Oil Change" section in "MAINTENANCE"
section).
31
Figure 18