Cub Cadet LT 2180 Operator's Manual page 39

QUICK
ATTACH
ROD
SHOULDER BOLT
(BOTH SIDES)
Figure 48
CAUTION
To avoid possible equipment damage, make
sure that the tractor implement lift handle is
raised to its highest setting before sliding the
deck out from under the tractor.
10. With the tractor implement lift handle raised to its
highest setting, slide the deck to the right and out
from under the tractor (See Figure 49).
Figure 49
11. Connect the spark plug wire.
TRACTOR
LATCH RECEIVER
(BOTH SIDES)
FRONT LIFT
ROD/BRACKET
ASSEMBLY
SLIDE
OUT
INSTALLATION OF DECK
Before performing the mower deck installation,
place the PTO switch in the "OFF" position,
engage the brake pedal lock, turn the ignition
key to the "OFF" position and remove the key
from the switch. Disconnect the spark plug wire
for additional safety.
When handling the mower deck, be careful not
to cut yourself on the sharp blades.
1. Position the tractor and mower deck on a firm,
level surface.
To avoid possible equipment damage, make
sure that the tractor implement lift handle is
raised to its highest setting before sliding the
deck under the tractor.
2. Refer to Figure 50 and position the deck on the
right side of the tractor with the front of the deck
facing toward the front of the tractor. Raise the
tractor implement lift handle to its highest setting
and slide the deck under the tractor.
39
WARNING
WARNING
CAUTION
SLIDE
UNDER
Figure 50