Table Of Contents - Craftsman 247.298770 Owner's Manual

UNDEX
Warranty .................................... 2
Safe Operation Practices ..................... 3
Introduction ................................... 4
Contents in Hardware Pack ......................... 5
Tiller Identification ................................ 6
Assembly Instructions ......................... 7
Adjustments ..................................... 9
Con trots ....................................... t 0
Engine Preparation ............................... 13
Operation ........................................ 13
Tilling .......................................... 14
Tilling Hints ..................................... 15
Maintenance ................................. 15
Off-Season Storage ............................ ! 9
Transmission--Repair Parts .................. 20
Tiller-- Repair Parts ................................ 22
Parts Information ..................... Back Cover
INTRODUCTION
This Product has been designed, engineered and manufactured to give you the best possible dependability
and performance.
Should you experience any problem you cannot easily remedy, please contact your nearest Sears, or
Simpson-Sears Service Department. They have well qualified, competent trained technicians and the proper
tools to service or repair this unit.
PRE-ASSEMBLY
_NOTE
The right and teft side of your tiller
is determined from operator's posi-
tion.
Before any step is undertaken, the instructions for
that step should be read through.
3o Gas (regular)
4. Cleaning rag
PARTS IN CARTON
TOOLS REQUIRED:
1. (2) 7116" Socket, open or box wrench.
2. (1) 9t16" Socket, open or box wrench.
3, (1) V_" Flat Screwdriver.
4. (1) Adjustable Wrench.
MATERIALS REQUIRED:
1. Funnel (for gas and oil--NOTE: DO NOT MIX)
2. S.AoE.-30 O11--2¾ pints
FIGURE 1.
4