Table of Contents
Advertisement
IMPORTANT
NOTES
Antenna/Cable
Connection
For proper reception, an antenna or cable connection is required.
Antenna Connection
For proper reception
of VHF/UHF
channels,
a directional
antenna
is required (see
previous page). For best reception, an outdoor antenna is recommended.
Procedure
£3 Connect the antenna cable from your antenna.
O
Select ANTENNA, in the Roller Guide Menu TM* SET UP Menu under input (see Getting
Started section, Step 7).
Incoming Cable from
Home Antenna
75 Ohm VHFAJHF
on back of STB
Cable Connection
Before connecting your cable to the STB, contact your local cable provider and ask
the following questions:
•
Is DTV availablethroughyourcable service?
What type of cable do you have? StandardCable TV Signals(Cable STD), HarmonicRelated
Carder (CableHRC) or IncrementalRelatedCarder (CableIRC).
Do you need a separatecablebox to receiveDTV signals?
Procedure
Connect the cable wire provided by your local cable provider.
O
Select one of the following in the Roller Guide Menu
TM
SET UP Menu under Input (see
Getting Started section, Step 7).
Cable STD - StandardCable"IV Signals
•
Cable HRC - HarmonicRelatedCarrier
Cable IRC - Incremental R elatedCarder
Note:
Incoming Cable from
Cable Provider
75 Ohm VHFAJHF
on back of STB
The Panasonic DTV set-top box is able to receive DTV signals from your local cable
provider only if they are transmitted in the 8VSB modulation format approved by the
FCC for DTV transmission.
Also, your cable provider may elect to transmit in the
8VSB format for only a limited period of time. Please contact your cable provider to
determine if 8VSB modulation is available.
* Roller Guide Menu is a trademark of Panasonic Consumer Electronics Company. U.S. Patent Pending.
[]
Advertisement
Table of Contents
