Panel Operation At Poweron; Default Setting; Default Setting Item - Epson STYLUS 4001968 Service Manual

General Description
1.4.2 Panel Operation at Power On
The following functions can be activated at power on by holding down the specified button on the
control panel.
Self-test mode:
Hex dump mode:
Demonstration mode:
Other functions that can be activated with the control panel at power on, such as the default setting
mode and the initial ink charge mode, are described in the sections that follow.

1.4.3 Default Setting

The printer can memorize certain number of printer setting parameters that defines its functions at
the initialization. You can change these parameters with the default setting mode for your specific
preference of the printer setting.

1.4.3.1 Default Setting Item

The settings listed in the table below can be made with the default setting mode. The default-setting
mode can be activated by hold down the ECONOMY/CONDENSED button while turning on the
printer. (Refer to the use~'s guide for the detail operation of the default-setting mode.)
Menu
Contents
Character Table
Auto Print Direction
Network l/F Mode
Mixed Text/Graphics
Mode
Auto Line Feed
*1= If set to ON, the capacity of input buffer is limited to 8 Kbyte,
Note:
Start the self-test printing mode by turning the printer on while
holding down the FONT button.
Start the built-in hexadecimal data dump print mode by returning
the printer on while holding down the FONT and LOAD/EJECT
buttons. Once this mode is selected, the printer prints all received
print data in hexadecimal form.
Start printing of a demonstration page by returning on the printer
while holding down the ALT button.
Table 1-7. Default Setting Item
Select the character table
ON: Print direction is automatically selected as to maintains
optimal print quality (alignment).
OFF: Depends on the command 'ESC U'.
ON: For network environment, such as LocalTalk.
(Time-out printing is disabled.)
ON: For normal environment. (llme-out printing is enabled.)
ON: To ensure proper printing of the image containing
graphics and scalable font, with certain applications,
such as MS Word, WordPerfect
OFF: For normal use.
ON: Line feed operation is automatically performed by CR
code input.
OFF:NO line feed operation with single CR code.
STYLUS 800 Service Manual
Description
V.5. I
or earlier.
Setting
ON
OFF
OFF
1
OFF