2.8 PROFIBUS DP Board Installation
Following two board types can be used for the fieldbus I/O option PROFIBUS DP.
- PCU-DPIO
- PCI-DPIO
2.8.1 Board Appearance
Part names and functions of the scanner board are shown in the following figure. For details
of the status display LEDs, refer to the 4. Troubleshooting in this manual.
PCU-DPIO
(Do not use this port.)
PCI-DPIO
Communication Status LED
Port for Board Configuration
Status Display LED (2)
Left: Communication Status LED
Right: Physical Error LED
Female 9-pin D-Sub
PROFIBUS DP Port
(Do not use this port.)
Fieldbus I/O Rev.6
4-pin Terminal
Watchdog Port
Status Display LED (2)
PROFIBUS-DP Port
LED (2)
(Not in use)
RJ45 Connector
(Not in use)
Configuration Port
Male 9-pin D-Sub
4-pin Terminal
Watchdog Port
Jumper for Board Address
JP1
Jumper for Board Address
JP1
0
1
2. Installation
JP1
0
1
C0 C1 C2
JP1
C0 C1 C2
41