2.7.2 Specifications
Part Number
Modes
Baud rates
Interface
Supported Devices
Maximum Nodes
Connection Types
Explicit Messaging
EDS Support
Input Data Size
Output Data Size
Automatic Detection
2.7.3 Software Installation
Before installing any boards in your controller, you must install the applicomIO console
application and drivers for the type of board you will be using.
(1) Start the controller.
(2) Run the C:\Install\FieldBus\Install\applicomIO\Disk1\Setup.EXE from the install
(3) Select the desired language for the installer.
(4) Select Install Products.
(5) Select applicomIO. Do not select applicomIO ActiveX.
Fieldbus I/O Rev.6
applicom PCI-DVNIO / PCU-DVNIO
Master/Slave
125, 250, 500 kbps
1 DeviceNet port
Group 2 Only Server and U.C.M.M. capable
63
Strobe, Polling, Cyclic and Change of State
Yes
Yes
1 to 255 bytes
1 to 255 bytes
Yes. Devices can be detected automatically.
folder in the controller to start the installation.
2. Installation
27