Page 1
® [RDFTS MODEL NUMBER 917. OWNER'S MANUAL • Assembly Operation Customer Responsibilities Service and Adjustments • Repair Parts CAUTION: Read and follow all safety rules and instructions before operating this equipment. FOR CONSUMER ASSISTANCE HOT LINE, CALL THIS TOLL FREE NUMBER: 1-800-659-5917...
Page 2
SAFETY RULES Safe Operation Practices for Ride-On Mowers IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. GENERAL OPERATION i11. CHILDREN Read, understand, and follow all instructions in the manual...
Page 3
EQUIPMENT For two (2) years from the date of purchase, if this Craftsman Riding Equipment is maintained, lubricated and tuned up according to the instructions in the owner's manual, Sears will repair or replace, free of charge, any parts found to be defective in material or workmanship.
ACCESSORIES AND ATTAC ENTS These accessories and attachments were available through most Sears retail outlets and service centers when the tractor was purchased. Most Sears stores can order these items for you when you provide the model number of your tractor. MAINTENANCE ENGINE SPARK PLUG...
Page 6
CONTENTS OF HARDWARE PACK Parts Bag contents shown full size Parts packed separately in carton (1) Shoulder Bolt 5/16-18 (1) Knob Seat Video Steering Cassette Wheel (1) Washer 17/32 x 1-3/16 x 12 Ga. Mulcher Plate Parts Bag Manual (3) Retainer Springs (double loop) Parts bag contents not shown full size...
Page 7
ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. the correct tools as necessary to insure proper tightness. TOOLS REQUIRED FOR ASSEMBLY STEERING...
Page 8
ASSEMBLY HOW TO SET UP YOUR TRACTOR INSTALL SEAT (See Fig. 3) Adjust seat before tightening adjustment knob. CONNECT BATTERY (See Fig. Remove cardboard packing on seat pan. CAUTION: Do not short battery termi- Place seat on seat pan and assemble shoulder bolt. nals.
Page 9
ASSEMBLY INSTALL MOWER DRIVE BELT Place the R.H. suspension arm on outward pointing deck pin. If necessary, rock and raise front of mower (See Figs. 4 and 7) to align deck pin with the hole in suspension arm. Be sure tractor is on level surface and mower suspension Retain with double loop retainer spring with loops down as shown.
Page 10
ASSEMBLY iNSTALL MULCHER PLATE (See Figs. 5 and 6) DEFLECTOR SHIELD Install two latch hooks to mutcher plate using screw, washer, lock washer, and weld nut as shown. NOTE: Pre-assemble weld nut to latch hook by inserting weld nut from the top with hook pointing down. Tighten hardware securely.
Page 11
OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. BATTERY CAUTION OR REVERSE FORWARD FAST SLOW WARNING ENGINE ON ENGINE OFF OIL PRESSURE CLUTCH LIGHTS ON LIGHTS OFF FUEL CHOKE MOWER HEIGHT DIFFERENTIAL...
Page 12
OPERATION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR. Compare the illustrations with your tractor to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. IGNITION ATTACHMENT LIGHT SWITCH SWITCH CLUTCH SWtTCH...
Page 13
OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can SAFETYGLASSES result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over the spectacles...
OPERATION TO TRANSPORT GAUGE WHEEL Raise attachment lift to highest position with attach- MOUNTING ment lift control. BRACKET When pushing or towing your tractor, be sure gearshift lever is in neutral (N) position. • Do not push or tow tractor at more than five (5) MPH. NOTE: To protect hood from damage when transporting 3/8 WASHER your tractor on a truck or a trailer, be sure hood is closed and...
Page 15
OPERATION • Pull choke control out for a cold engine start attempt. • Do not mow grass when it is wet. Wet grass will plug For a warm engine start attempt the choke control may mower and leave undesirable clumps. Allow grass to not be needed.
Page 16
CUSTOME RESPONSI ILITIES MAINTENANCE SCHEDULE FILL IN DATES AS YOU COMPLETE REGULAR SERVICE SERVICE DATES Check Brake Operation Check Tire Pressure Check for Loose Fasteners Sharpen/Replace Mower Blades Lubrication Chart Check Battery Level/Recharge Clean Battery and Terminals CheckTransaxle Cooling Adjust Blade Belt(s) Tension Adjust Motion Drive Belt(s) Tension _lmuw_Bm Check Engine Oil Level...
Page 17
CUSTOMER RESPO IBILITIES TRACTOR TO SHARPEN BLADE (See Fig. Always observe safety rules when performing any mainte- Care should be taken to keep the blade balanced. nance. unbalanced blade will cause excessive vibration and even- tual damage to mower and engine. BRAKE OPERATION •...
Page 18
C STOMER RESPONSIBILITIES V-BELTS OIL FILL CAP/DIPSTICK Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear. TRANSAXLE COOLING Keep transaxle free from build-up of dirt and chaff which can restrict cooling.
Page 19
CUSTOMER RESPONSIBILITIES CLEAN SCREEN (See Fig. IN-LINE FUEL FILTER (See Fig. Air screen must be kept free of dirt and chaff to prevent The fuel filter should be replaced once each season. If fuel engine damage from overheating. Clean with a wire brush filter becomes clogged, obstructing fuel flow to carburetor, or compressed air to remove dirt and stubborn dried gum replacement is required.
Page 20
VICE AND ADJUSTMENTS A" CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: Depress clutch/brake pedal fully and set parking brake. Place gearshift lever in neutral (N) position. Place attachment clutch in "DISENGAGED" position. ® Turn ignition key "OFF" and remove key. Make sure the blades and all moving parts have completely stopped.
SERVICE AND ADJUSTMENTS BOTH FRONT LINKS MUST BE EQUAL IN LENGTH BOTTOM EDGE BOTTOM EDGE OF MOWER TO OF MOWER TO GROUND GROUND GROUND NUT "E" FIG. 20 SUSPENSION TRUNNION FIG, 23 MFT LINK ADJUSTMENT TO REPLACE MOWER DRIVE BELT FIG, 2! MOWER DRIVE BELT REMOVAL (See Fig.
Page 22
SERVICE AND ADJUSTMENTS TO REPLACE MOWER BLADE DRIVE BELT ADJUST ATTACHMENT CLUTCH (See (See Fig. 25) Fig. 26) The electric clutch should provide years of service. Park the tractor on level surface. Engage parking brake. clutch has a built-in brake that stops the pulley within 5 •...
Page 23
VICE AND ADJUSTMENTS TO REPLACE MOTION DRIVE BELT (See Fig. 28) LOCKNUTS Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest. Remove mower (See "TO REMOVE MOWER" in this CENTER section of this manual.) •...
Page 24
SERVICE AND ADJUSTME TO START ENGINE WITH A WEAK BATTERY TO REPLACE HEADLIGHT BULB • Raise hood. (See Fig. 32) • Pull bulb holder out of the hole in the backside of the grill. CAUTION: Lead-acid batteries gener- ate explosive gases.
SERVICE AND ADJUSTMENTS ENGINE ACCELERATION TEST - • Move throttle control lever from slow (_m.) to fast (,_) ADJUST THROTTLE CONTROL CABLE position. If engine hesitates or dies, turn idle mixture (See Figs. screw out (counterclockwise) 1/8 turn. Repeat test and 34 &...
Page 26
STORAGE Immediately prepare your tractor for storage at the end of ENGINE the season or if the tractor will not be used for 30 days or more. FUEL SYSTEM IMPORTANT: IT IS IMPORTANT PREVENT CAUTION: Never store the tractor with DEPOSITS FROM FORMING...
Page 27
TROUBLESHOOTING POINTS PROBLEM CAUSE CORRECTION Will not start Out of fuel. Fill fuel tank. Engine not "CHOKED" properly. See "TO START ENGINE" in Operation section. Engine flooded. Wait several minutes before attempting to start. Bad spark plug. Replace spark plug. Dirty air filter.
Page 28
T OUBLESHOOTING POINTS CAUSE PROBLEM CORRECTION Faulty operator-safety presence control system. Check wiring, switches and connections. If not Engine continues to run corrected, contact an authorized service center/ when operater leaves seat! with attachment clutch department. engaged Poor cut - uneven Worn, bent or loose blade.
Page 42
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 MOWER LiFT 1718...
Page 43
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 MOWER LiFT PART DESCRIPTION 136971 WireAsm., Inner w/plunger 136968 Shaft Asm Lift 138284 Pin Groove 12000002 E Ring #5133-62 19211621 Washer 21/32XlX21 120183X Bearing Nylon 125631X Grip Handle Fluted 122365X Button, Plunger 122512X Spring Cprsn 139865...
Page 44
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 MOWER DECK 33 _:_...
Page 45
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 MOWER DECK PART PART DESCRIPTION DESCRIPTION 156948 144917 Housing, Mower 46" Pulley, Idler, Driven 138457 137273 Bracket Asm., Sway Bar Spring, Secondary 44/46/50 Vent STD624008 17490620 Retainer Spring Screw, Thdroll 3/8-16 x 1-1/4 Tytt 130832 Arm, Suspension, Rear (Sway Bar) 122052X...
Page 46
REPAIR PARTS TRACTOR - = MODEL NUMBER 917,258680 PEERLESS TRANSAXLE - MODEL NUMBER 930-057A 68 34...
Page 47
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 PEERLESS TRANSAXLE - MODEL NUMBER 930-057A REF PART REF PART DESCRIPTION NO. NO. DESCR_PTION 772108A Cover, Transaxle 792075 Locknut 5/16-24 Holder, Brake Pad 780086A Bearing, Needle 790025 770102A Case, Transaxle 786066 Spacer 776260A Shaft, Counter 786086...
Page 48
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 AIR INTAKE BAFFLES AND SHROUD 0--5 BREATHER AND VENT ! --11 !7 / /'_...
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE = MODEL NUMBER MV18S, TYPE NUMBER PS58560 AIR INTAKE BAFFLES & SHROUD PART DESCRIPTION KEY PART DESCRIPTION 52-063-41 X-276-7 Wing Nut 1/4-20 Baffle, #2 Cylinder Head 52-755-83 Kit, Cover and Tube 52-313-05 Grommet (2) 52-063-42...
Page 50
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 CRANKCASE ° t 19.2°\ ,,_2_=6 / CARBURETOR 0--32 -- 34 _---...
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 CARBURETOR CRANKCASE PART DESCRIPTION PART DESCRIPTION X-82-2 Nut, Hex 5/16-18 (12) 52-041-09 Gasket, Intake (2) Kit, Manifold 52-468-12 Washer, Flat 5/16 (12) 52-755-91 (Includes Key Numbers 3 thru 8) 82-755-16 Kit, #1 Cylinder Barrel...
Page 52
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 CTL,.OER,EAO CRANKSHAFT DiPSTiCK ELECTRIC STARTER EXHAUST...
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 CRANKSHAFT ELECTRIC STARTER PART DESCRIPTION PART DESCRIPTION 52-014-93 Crankshaft 52-098-!2 Starter Assembly 52-468-03 Washer, Thrust .119/.122 (A.R.) (Includes Key Numbers 4 thru 9) 52-468-04 Washer, Thrust .128/.
Page 54
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE = MODEL NUMBER MV18S, TYPE NUMBER PS58560 GOVERNOR FUEL PUMP _'_"_ 18 19_ IGNITION FLYWH EEL 8--3...
REPAIR PARTS TRACTOR - - MODEL NUMBER 917,258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 FUEL PUMP FLYWHEEL PART DESCRIPTION PART DESCRIPTION Screw, Pozidriv, Truss Head 25-162-01 Screen, Grass 47-086-08 1/4-20 x 5/8 (2) 25-086-21 Screw, Hex Washer Head 52-559-01 Pump, Fuel Assembly 1/4-20 x 5/8 (4)
Page 56
REPAIR PARTS TRACTOR -- MODEL NUMBER 917.258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 OIL FILTER OIL PAN _ 3__4 OIL SWITCH] PISTON AND ROD OIL PUMP CAMSHAFT VALVES @-°...
Page 57
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 LOW OIL PRESSURE SWITCH OIL PAN PART DESCRIPTION PART DESCRIPTION X-75-23 Plug, Pipe 1/8 N.P.T.F. X-67-64 Screw, Hex Washer Head #10-32 x 7/16 (2) 52-050-03 Filter, Oil Pickup CAMSHAFT...
Page 59
SUGGESTED GUIDE FOR SiGHTiNG SLOPES FOR SAFE OPERATION ONLY RiDE UP AND DOWN HILL, NOT ACROSS HiLL SiGHTiNG GUIDE SBGHT AND HOLD THiS LEVEL WiTH SKY LINE OR TREE. ili_ Operate your Tractor up and down the face of slopes (not greater than...
Page 60
CRI:IF rZMI:IN® 18.0 HP ELECTRIC START 46" MOWER 6 SPEED TRANSAXLE LAWN TRACTOR MODEL NO. Each tractor has its own model number. Each engine has its own model number. 917.258680 The model number for your tractor will be found on the model plate located under the seat.
Page 61
® [RDFTS MODEL NUMBER 917. OWNER'S MANUAL • Assembly Operation Customer Responsibilities Service and Adjustments • Repair Parts CAUTION: Read and follow all safety rules and instructions before operating this equipment. FOR CONSUMER ASSISTANCE HOT LINE, CALL THIS TOLL FREE NUMBER: 1-800-659-5917...
Page 62
SAFETY RULES Safe Operation Practices for Ride-On Mowers IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. GENERAL OPERATION i11. CHILDREN Read, understand, and follow all instructions in the manual...
Page 63
EQUIPMENT For two (2) years from the date of purchase, if this Craftsman Riding Equipment is maintained, lubricated and tuned up according to the instructions in the owner's manual, Sears will repair or replace, free of charge, any parts found to be defective in material or workmanship.
TABLE OF CONTENTS SAFETY RULES ............MAINTENANCE SCHEDULE ........PRODUCT SPECIFICATIONS ........SERVICE AND ADJUSTMENTS ......20-25 STORAGE ..............CUSTOMER RESPONSIBILITIES ..... 3, 16-19 WARRANTY ..............TROUBLESHOOTING ..........27-28 TRACTOR ACCESSORIES .......... REPAIR PARTS - TRACTOR ......... 30-47 ASSEMBLY .............. 7-10 REPAIR PARTS - ENGINE ........
Page 65
ACCESSORIES AND ATTAC ENTS These accessories and attachments were available through most Sears retail outlets and service centers when the tractor was purchased. Most Sears stores can order these items for you when you provide the model number of your tractor. MAINTENANCE ENGINE SPARK PLUG...
Page 66
CONTENTS OF HARDWARE PACK Parts Bag contents shown full size Parts packed separately in carton (1) Shoulder Bolt 5/16-18 (1) Knob Seat Video Steering Cassette Wheel (1) Washer 17/32 x 1-3/16 x 12 Ga. Mulcher Plate Parts Bag Manual (3) Retainer Springs (double loop) Parts bag contents not shown full size...
Page 67
ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. the correct tools as necessary to insure proper tightness. TOOLS REQUIRED FOR ASSEMBLY STEERING...
Page 68
ASSEMBLY HOW TO SET UP YOUR TRACTOR INSTALL SEAT (See Fig. 3) Adjust seat before tightening adjustment knob. CONNECT BATTERY (See Fig. Remove cardboard packing on seat pan. CAUTION: Do not short battery termi- Place seat on seat pan and assemble shoulder bolt. nals.
Page 69
ASSEMBLY INSTALL MOWER DRIVE BELT Place the R.H. suspension arm on outward pointing deck pin. If necessary, rock and raise front of mower (See Figs. 4 and 7) to align deck pin with the hole in suspension arm. Be sure tractor is on level surface and mower suspension Retain with double loop retainer spring with loops down as shown.
Page 70
ASSEMBLY iNSTALL MULCHER PLATE (See Figs. 5 and 6) DEFLECTOR SHIELD Install two latch hooks to mutcher plate using screw, washer, lock washer, and weld nut as shown. NOTE: Pre-assemble weld nut to latch hook by inserting weld nut from the top with hook pointing down. Tighten hardware securely.
Page 71
OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. BATTERY CAUTION OR REVERSE FORWARD FAST SLOW WARNING ENGINE ON ENGINE OFF OIL PRESSURE CLUTCH LIGHTS ON LIGHTS OFF FUEL CHOKE MOWER HEIGHT DIFFERENTIAL...
Page 72
OPERATION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR. Compare the illustrations with your tractor to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. IGNITION ATTACHMENT LIGHT SWITCH SWITCH CLUTCH SWtTCH...
OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can SAFETYGLASSES result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over the spectacles...
Page 74
OPERATION TO TRANSPORT GAUGE WHEEL Raise attachment lift to highest position with attach- MOUNTING ment lift control. BRACKET When pushing or towing your tractor, be sure gearshift lever is in neutral (N) position. • Do not push or tow tractor at more than five (5) MPH. NOTE: To protect hood from damage when transporting 3/8 WASHER your tractor on a truck or a trailer, be sure hood is closed and...
Page 75
OPERATION • Pull choke control out for a cold engine start attempt. • Do not mow grass when it is wet. Wet grass will plug For a warm engine start attempt the choke control may mower and leave undesirable clumps. Allow grass to not be needed.
Page 76
CUSTOME RESPONSI ILITIES MAINTENANCE SCHEDULE FILL IN DATES AS YOU COMPLETE REGULAR SERVICE SERVICE DATES Check Brake Operation Check Tire Pressure Check for Loose Fasteners Sharpen/Replace Mower Blades Lubrication Chart Check Battery Level/Recharge Clean Battery and Terminals CheckTransaxle Cooling Adjust Blade Belt(s) Tension Adjust Motion Drive Belt(s) Tension _lmuw_Bm Check Engine Oil Level...
Page 77
CUSTOMER RESPO IBILITIES TRACTOR TO SHARPEN BLADE (See Fig. Always observe safety rules when performing any mainte- Care should be taken to keep the blade balanced. nance. unbalanced blade will cause excessive vibration and even- tual damage to mower and engine. BRAKE OPERATION •...
Page 78
C STOMER RESPONSIBILITIES V-BELTS OIL FILL CAP/DIPSTICK Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear. TRANSAXLE COOLING Keep transaxle free from build-up of dirt and chaff which can restrict cooling.
CUSTOMER RESPONSIBILITIES CLEAN SCREEN (See Fig. IN-LINE FUEL FILTER (See Fig. Air screen must be kept free of dirt and chaff to prevent The fuel filter should be replaced once each season. If fuel engine damage from overheating. Clean with a wire brush filter becomes clogged, obstructing fuel flow to carburetor, or compressed air to remove dirt and stubborn dried gum replacement is required.
Page 80
VICE AND ADJUSTMENTS A" CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: Depress clutch/brake pedal fully and set parking brake. Place gearshift lever in neutral (N) position. Place attachment clutch in "DISENGAGED" position. ® Turn ignition key "OFF" and remove key. Make sure the blades and all moving parts have completely stopped.
Page 81
SERVICE AND ADJUSTMENTS BOTH FRONT LINKS MUST BE EQUAL IN LENGTH BOTTOM EDGE BOTTOM EDGE OF MOWER TO OF MOWER TO GROUND GROUND GROUND NUT "E" FIG. 20 SUSPENSION TRUNNION FIG, 23 MFT LINK ADJUSTMENT TO REPLACE MOWER DRIVE BELT FIG, 2! MOWER DRIVE BELT REMOVAL (See Fig.
Page 82
SERVICE AND ADJUSTMENTS TO REPLACE MOWER BLADE DRIVE BELT ADJUST ATTACHMENT CLUTCH (See (See Fig. 25) Fig. 26) The electric clutch should provide years of service. Park the tractor on level surface. Engage parking brake. clutch has a built-in brake that stops the pulley within 5 •...
Page 83
VICE AND ADJUSTMENTS TO REPLACE MOTION DRIVE BELT (See Fig. 28) LOCKNUTS Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest. Remove mower (See "TO REMOVE MOWER" in this CENTER section of this manual.) •...
Page 84
SERVICE AND ADJUSTME TO START ENGINE WITH A WEAK BATTERY TO REPLACE HEADLIGHT BULB • Raise hood. (See Fig. 32) • Pull bulb holder out of the hole in the backside of the grill. CAUTION: Lead-acid batteries gener- ate explosive gases.
Page 85
SERVICE AND ADJUSTMENTS ENGINE ACCELERATION TEST - • Move throttle control lever from slow (_m.) to fast (,_) ADJUST THROTTLE CONTROL CABLE position. If engine hesitates or dies, turn idle mixture (See Figs. screw out (counterclockwise) 1/8 turn. Repeat test and 34 &...
Page 86
STORAGE Immediately prepare your tractor for storage at the end of ENGINE the season or if the tractor will not be used for 30 days or more. FUEL SYSTEM IMPORTANT: IT IS IMPORTANT PREVENT CAUTION: Never store the tractor with DEPOSITS FROM FORMING...
Page 87
TROUBLESHOOTING POINTS PROBLEM CAUSE CORRECTION Will not start Out of fuel. Fill fuel tank. Engine not "CHOKED" properly. See "TO START ENGINE" in Operation section. Engine flooded. Wait several minutes before attempting to start. Bad spark plug. Replace spark plug. Dirty air filter.
Page 88
T OUBLESHOOTING POINTS CAUSE PROBLEM CORRECTION Faulty operator-safety presence control system. Check wiring, switches and connections. If not Engine continues to run corrected, contact an authorized service center/ when operater leaves seat! with attachment clutch department. engaged Poor cut - uneven Worn, bent or loose blade.
Page 102
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 MOWER LiFT 1718...
Page 103
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 MOWER LiFT PART DESCRIPTION 136971 WireAsm., Inner w/plunger 136968 Shaft Asm Lift 138284 Pin Groove 12000002 E Ring #5133-62 19211621 Washer 21/32XlX21 120183X Bearing Nylon 125631X Grip Handle Fluted 122365X Button, Plunger 122512X Spring Cprsn 139865...
Page 104
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 MOWER DECK 33 _:_...
Page 105
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 MOWER DECK PART PART DESCRIPTION DESCRIPTION 156948 144917 Housing, Mower 46" Pulley, Idler, Driven 138457 137273 Bracket Asm., Sway Bar Spring, Secondary 44/46/50 Vent STD624008 17490620 Retainer Spring Screw, Thdroll 3/8-16 x 1-1/4 Tytt 130832 Arm, Suspension, Rear (Sway Bar) 122052X...
Page 106
REPAIR PARTS TRACTOR - = MODEL NUMBER 917,258680 PEERLESS TRANSAXLE - MODEL NUMBER 930-057A 68 34...
Page 107
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 PEERLESS TRANSAXLE - MODEL NUMBER 930-057A REF PART REF PART DESCRIPTION NO. NO. DESCR_PTION 772108A Cover, Transaxle 792075 Locknut 5/16-24 Holder, Brake Pad 780086A Bearing, Needle 790025 770102A Case, Transaxle 786066 Spacer 776260A Shaft, Counter 786086...
Page 108
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 AIR INTAKE BAFFLES AND SHROUD 0--5 BREATHER AND VENT ! --11 !7 / /'_...
Page 109
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE = MODEL NUMBER MV18S, TYPE NUMBER PS58560 AIR INTAKE BAFFLES & SHROUD PART DESCRIPTION KEY PART DESCRIPTION 52-063-41 X-276-7 Wing Nut 1/4-20 Baffle, #2 Cylinder Head 52-755-83 Kit, Cover and Tube 52-313-05 Grommet (2) 52-063-42...
Page 110
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 CRANKCASE ° t 19.2°\ ,,_2_=6 / CARBURETOR 0--32 -- 34 _---...
Page 111
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 CARBURETOR CRANKCASE PART DESCRIPTION PART DESCRIPTION X-82-2 Nut, Hex 5/16-18 (12) 52-041-09 Gasket, Intake (2) Kit, Manifold 52-468-12 Washer, Flat 5/16 (12) 52-755-91 (Includes Key Numbers 3 thru 8) 82-755-16 Kit, #1 Cylinder Barrel...
Page 112
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 CTL,.OER,EAO CRANKSHAFT DiPSTiCK ELECTRIC STARTER EXHAUST...
Page 113
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 CRANKSHAFT ELECTRIC STARTER PART DESCRIPTION PART DESCRIPTION 52-014-93 Crankshaft 52-098-!2 Starter Assembly 52-468-03 Washer, Thrust .119/.122 (A.R.) (Includes Key Numbers 4 thru 9) 52-468-04 Washer, Thrust .128/.
Page 114
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE = MODEL NUMBER MV18S, TYPE NUMBER PS58560 GOVERNOR FUEL PUMP _'_"_ 18 19_ IGNITION FLYWH EEL 8--3...
Page 115
REPAIR PARTS TRACTOR - - MODEL NUMBER 917,258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 FUEL PUMP FLYWHEEL PART DESCRIPTION PART DESCRIPTION Screw, Pozidriv, Truss Head 25-162-01 Screen, Grass 47-086-08 1/4-20 x 5/8 (2) 25-086-21 Screw, Hex Washer Head 52-559-01 Pump, Fuel Assembly 1/4-20 x 5/8 (4)
Page 116
REPAIR PARTS TRACTOR -- MODEL NUMBER 917.258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 OIL FILTER OIL PAN _ 3__4 OIL SWITCH] PISTON AND ROD OIL PUMP CAMSHAFT VALVES @-°...
Page 117
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 LOW OIL PRESSURE SWITCH OIL PAN PART DESCRIPTION PART DESCRIPTION X-75-23 Plug, Pipe 1/8 N.P.T.F. X-67-64 Screw, Hex Washer Head #10-32 x 7/16 (2) 52-050-03 Filter, Oil Pickup CAMSHAFT...
Page 119
SUGGESTED GUIDE FOR SiGHTiNG SLOPES FOR SAFE OPERATION ONLY RiDE UP AND DOWN HILL, NOT ACROSS HiLL SiGHTiNG GUIDE SBGHT AND HOLD THiS LEVEL WiTH SKY LINE OR TREE. ili_ Operate your Tractor up and down the face of slopes (not greater than...
Page 120
CRI:IF rZMI:IN® 18.0 HP ELECTRIC START 46" MOWER 6 SPEED TRANSAXLE LAWN TRACTOR MODEL NO. Each tractor has its own model number. Each engine has its own model number. 917.258680 The model number for your tractor will be found on the model plate located under the seat.
Page 121
® [RDFTS MODEL NUMBER 917. OWNER'S MANUAL • Assembly Operation Customer Responsibilities Service and Adjustments • Repair Parts CAUTION: Read and follow all safety rules and instructions before operating this equipment. FOR CONSUMER ASSISTANCE HOT LINE, CALL THIS TOLL FREE NUMBER: 1-800-659-5917...
Page 122
SAFETY RULES Safe Operation Practices for Ride-On Mowers IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. GENERAL OPERATION i11. CHILDREN Read, understand, and follow all instructions in the manual...
Page 123
EQUIPMENT For two (2) years from the date of purchase, if this Craftsman Riding Equipment is maintained, lubricated and tuned up according to the instructions in the owner's manual, Sears will repair or replace, free of charge, any parts found to be defective in material or workmanship.
ACCESSORIES AND ATTAC ENTS These accessories and attachments were available through most Sears retail outlets and service centers when the tractor was purchased. Most Sears stores can order these items for you when you provide the model number of your tractor. MAINTENANCE ENGINE SPARK PLUG...
Page 126
CONTENTS OF HARDWARE PACK Parts Bag contents shown full size Parts packed separately in carton (1) Shoulder Bolt 5/16-18 (1) Knob Seat Video Steering Cassette Wheel (1) Washer 17/32 x 1-3/16 x 12 Ga. Mulcher Plate Parts Bag Manual (3) Retainer Springs (double loop) Parts bag contents not shown full size...
Page 127
ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. the correct tools as necessary to insure proper tightness. TOOLS REQUIRED FOR ASSEMBLY STEERING...
Page 128
ASSEMBLY HOW TO SET UP YOUR TRACTOR INSTALL SEAT (See Fig. 3) Adjust seat before tightening adjustment knob. CONNECT BATTERY (See Fig. Remove cardboard packing on seat pan. CAUTION: Do not short battery termi- Place seat on seat pan and assemble shoulder bolt. nals.
Page 129
ASSEMBLY INSTALL MOWER DRIVE BELT Place the R.H. suspension arm on outward pointing deck pin. If necessary, rock and raise front of mower (See Figs. 4 and 7) to align deck pin with the hole in suspension arm. Be sure tractor is on level surface and mower suspension Retain with double loop retainer spring with loops down as shown.
Page 130
ASSEMBLY iNSTALL MULCHER PLATE (See Figs. 5 and 6) DEFLECTOR SHIELD Install two latch hooks to mutcher plate using screw, washer, lock washer, and weld nut as shown. NOTE: Pre-assemble weld nut to latch hook by inserting weld nut from the top with hook pointing down. Tighten hardware securely.
Page 131
OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. BATTERY CAUTION OR REVERSE FORWARD FAST SLOW WARNING ENGINE ON ENGINE OFF OIL PRESSURE CLUTCH LIGHTS ON LIGHTS OFF FUEL CHOKE MOWER HEIGHT DIFFERENTIAL...
Page 132
OPERATION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR. Compare the illustrations with your tractor to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. IGNITION ATTACHMENT LIGHT SWITCH SWITCH CLUTCH SWtTCH...
Page 133
OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can SAFETYGLASSES result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over the spectacles...
Page 134
OPERATION TO TRANSPORT GAUGE WHEEL Raise attachment lift to highest position with attach- MOUNTING ment lift control. BRACKET When pushing or towing your tractor, be sure gearshift lever is in neutral (N) position. • Do not push or tow tractor at more than five (5) MPH. NOTE: To protect hood from damage when transporting 3/8 WASHER your tractor on a truck or a trailer, be sure hood is closed and...
Page 135
OPERATION • Pull choke control out for a cold engine start attempt. • Do not mow grass when it is wet. Wet grass will plug For a warm engine start attempt the choke control may mower and leave undesirable clumps. Allow grass to not be needed.
CUSTOME RESPONSI ILITIES MAINTENANCE SCHEDULE FILL IN DATES AS YOU COMPLETE REGULAR SERVICE SERVICE DATES Check Brake Operation Check Tire Pressure Check for Loose Fasteners Sharpen/Replace Mower Blades Lubrication Chart Check Battery Level/Recharge Clean Battery and Terminals CheckTransaxle Cooling Adjust Blade Belt(s) Tension Adjust Motion Drive Belt(s) Tension _lmuw_Bm Check Engine Oil Level...
Page 137
CUSTOMER RESPO IBILITIES TRACTOR TO SHARPEN BLADE (See Fig. Always observe safety rules when performing any mainte- Care should be taken to keep the blade balanced. nance. unbalanced blade will cause excessive vibration and even- tual damage to mower and engine. BRAKE OPERATION •...
Page 138
C STOMER RESPONSIBILITIES V-BELTS OIL FILL CAP/DIPSTICK Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear. TRANSAXLE COOLING Keep transaxle free from build-up of dirt and chaff which can restrict cooling.
Page 139
CUSTOMER RESPONSIBILITIES CLEAN SCREEN (See Fig. IN-LINE FUEL FILTER (See Fig. Air screen must be kept free of dirt and chaff to prevent The fuel filter should be replaced once each season. If fuel engine damage from overheating. Clean with a wire brush filter becomes clogged, obstructing fuel flow to carburetor, or compressed air to remove dirt and stubborn dried gum replacement is required.
Page 140
VICE AND ADJUSTMENTS A" CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: Depress clutch/brake pedal fully and set parking brake. Place gearshift lever in neutral (N) position. Place attachment clutch in "DISENGAGED" position. ® Turn ignition key "OFF" and remove key. Make sure the blades and all moving parts have completely stopped.
Page 141
SERVICE AND ADJUSTMENTS BOTH FRONT LINKS MUST BE EQUAL IN LENGTH BOTTOM EDGE BOTTOM EDGE OF MOWER TO OF MOWER TO GROUND GROUND GROUND NUT "E" FIG. 20 SUSPENSION TRUNNION FIG, 23 MFT LINK ADJUSTMENT TO REPLACE MOWER DRIVE BELT FIG, 2! MOWER DRIVE BELT REMOVAL (See Fig.
Page 142
SERVICE AND ADJUSTMENTS TO REPLACE MOWER BLADE DRIVE BELT ADJUST ATTACHMENT CLUTCH (See (See Fig. 25) Fig. 26) The electric clutch should provide years of service. Park the tractor on level surface. Engage parking brake. clutch has a built-in brake that stops the pulley within 5 •...
Page 143
VICE AND ADJUSTMENTS TO REPLACE MOTION DRIVE BELT (See Fig. 28) LOCKNUTS Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest. Remove mower (See "TO REMOVE MOWER" in this CENTER section of this manual.) •...
Page 144
SERVICE AND ADJUSTME TO START ENGINE WITH A WEAK BATTERY TO REPLACE HEADLIGHT BULB • Raise hood. (See Fig. 32) • Pull bulb holder out of the hole in the backside of the grill. CAUTION: Lead-acid batteries gener- ate explosive gases.
Page 145
SERVICE AND ADJUSTMENTS ENGINE ACCELERATION TEST - • Move throttle control lever from slow (_m.) to fast (,_) ADJUST THROTTLE CONTROL CABLE position. If engine hesitates or dies, turn idle mixture (See Figs. screw out (counterclockwise) 1/8 turn. Repeat test and 34 &...
Page 146
STORAGE Immediately prepare your tractor for storage at the end of ENGINE the season or if the tractor will not be used for 30 days or more. FUEL SYSTEM IMPORTANT: IT IS IMPORTANT PREVENT CAUTION: Never store the tractor with DEPOSITS FROM FORMING...
Page 147
TROUBLESHOOTING POINTS PROBLEM CAUSE CORRECTION Will not start Out of fuel. Fill fuel tank. Engine not "CHOKED" properly. See "TO START ENGINE" in Operation section. Engine flooded. Wait several minutes before attempting to start. Bad spark plug. Replace spark plug. Dirty air filter.
Page 148
T OUBLESHOOTING POINTS CAUSE PROBLEM CORRECTION Faulty operator-safety presence control system. Check wiring, switches and connections. If not Engine continues to run corrected, contact an authorized service center/ when operater leaves seat! with attachment clutch department. engaged Poor cut - uneven Worn, bent or loose blade.
Page 162
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 MOWER LiFT 1718...
Page 163
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 MOWER LiFT PART DESCRIPTION 136971 WireAsm., Inner w/plunger 136968 Shaft Asm Lift 138284 Pin Groove 12000002 E Ring #5133-62 19211621 Washer 21/32XlX21 120183X Bearing Nylon 125631X Grip Handle Fluted 122365X Button, Plunger 122512X Spring Cprsn 139865...
Page 164
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 MOWER DECK 33 _:_...
Page 165
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 MOWER DECK PART PART DESCRIPTION DESCRIPTION 156948 144917 Housing, Mower 46" Pulley, Idler, Driven 138457 137273 Bracket Asm., Sway Bar Spring, Secondary 44/46/50 Vent STD624008 17490620 Retainer Spring Screw, Thdroll 3/8-16 x 1-1/4 Tytt 130832 Arm, Suspension, Rear (Sway Bar) 122052X...
Page 166
REPAIR PARTS TRACTOR - = MODEL NUMBER 917,258680 PEERLESS TRANSAXLE - MODEL NUMBER 930-057A 68 34...
Page 167
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 PEERLESS TRANSAXLE - MODEL NUMBER 930-057A REF PART REF PART DESCRIPTION NO. NO. DESCR_PTION 772108A Cover, Transaxle 792075 Locknut 5/16-24 Holder, Brake Pad 780086A Bearing, Needle 790025 770102A Case, Transaxle 786066 Spacer 776260A Shaft, Counter 786086...
Page 168
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 AIR INTAKE BAFFLES AND SHROUD 0--5 BREATHER AND VENT ! --11 !7 / /'_...
Page 169
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE = MODEL NUMBER MV18S, TYPE NUMBER PS58560 AIR INTAKE BAFFLES & SHROUD PART DESCRIPTION KEY PART DESCRIPTION 52-063-41 X-276-7 Wing Nut 1/4-20 Baffle, #2 Cylinder Head 52-755-83 Kit, Cover and Tube 52-313-05 Grommet (2) 52-063-42...
Page 170
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 CRANKCASE ° t 19.2°\ ,,_2_=6 / CARBURETOR 0--32 -- 34 _---...
Page 171
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 CARBURETOR CRANKCASE PART DESCRIPTION PART DESCRIPTION X-82-2 Nut, Hex 5/16-18 (12) 52-041-09 Gasket, Intake (2) Kit, Manifold 52-468-12 Washer, Flat 5/16 (12) 52-755-91 (Includes Key Numbers 3 thru 8) 82-755-16 Kit, #1 Cylinder Barrel...
Page 172
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 CTL,.OER,EAO CRANKSHAFT DiPSTiCK ELECTRIC STARTER EXHAUST...
Page 173
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 CRANKSHAFT ELECTRIC STARTER PART DESCRIPTION PART DESCRIPTION 52-014-93 Crankshaft 52-098-!2 Starter Assembly 52-468-03 Washer, Thrust .119/.122 (A.R.) (Includes Key Numbers 4 thru 9) 52-468-04 Washer, Thrust .128/.
Page 174
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE = MODEL NUMBER MV18S, TYPE NUMBER PS58560 GOVERNOR FUEL PUMP _'_"_ 18 19_ IGNITION FLYWH EEL 8--3...
Page 175
REPAIR PARTS TRACTOR - - MODEL NUMBER 917,258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 FUEL PUMP FLYWHEEL PART DESCRIPTION PART DESCRIPTION Screw, Pozidriv, Truss Head 25-162-01 Screen, Grass 47-086-08 1/4-20 x 5/8 (2) 25-086-21 Screw, Hex Washer Head 52-559-01 Pump, Fuel Assembly 1/4-20 x 5/8 (4)
Page 176
REPAIR PARTS TRACTOR -- MODEL NUMBER 917.258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 OIL FILTER OIL PAN _ 3__4 OIL SWITCH] PISTON AND ROD OIL PUMP CAMSHAFT VALVES @-°...
Page 177
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 LOW OIL PRESSURE SWITCH OIL PAN PART DESCRIPTION PART DESCRIPTION X-75-23 Plug, Pipe 1/8 N.P.T.F. X-67-64 Screw, Hex Washer Head #10-32 x 7/16 (2) 52-050-03 Filter, Oil Pickup CAMSHAFT...
Page 179
SUGGESTED GUIDE FOR SiGHTiNG SLOPES FOR SAFE OPERATION ONLY RiDE UP AND DOWN HILL, NOT ACROSS HiLL SiGHTiNG GUIDE SBGHT AND HOLD THiS LEVEL WiTH SKY LINE OR TREE. ili_ Operate your Tractor up and down the face of slopes (not greater than...
Page 180
CRI:IF rZMI:IN® 18.0 HP ELECTRIC START 46" MOWER 6 SPEED TRANSAXLE LAWN TRACTOR MODEL NO. Each tractor has its own model number. Each engine has its own model number. 917.258680 The model number for your tractor will be found on the model plate located under the seat.
Page 181
® [RDFTS MODEL NUMBER 917. OWNER'S MANUAL • Assembly Operation Customer Responsibilities Service and Adjustments • Repair Parts CAUTION: Read and follow all safety rules and instructions before operating this equipment. FOR CONSUMER ASSISTANCE HOT LINE, CALL THIS TOLL FREE NUMBER: 1-800-659-5917...
Page 182
SAFETY RULES Safe Operation Practices for Ride-On Mowers IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. GENERAL OPERATION i11. CHILDREN Read, understand, and follow all instructions in the manual...
Page 183
EQUIPMENT For two (2) years from the date of purchase, if this Craftsman Riding Equipment is maintained, lubricated and tuned up according to the instructions in the owner's manual, Sears will repair or replace, free of charge, any parts found to be defective in material or workmanship.
TABLE OF CONTENTS SAFETY RULES ............MAINTENANCE SCHEDULE ........PRODUCT SPECIFICATIONS ........SERVICE AND ADJUSTMENTS ......20-25 STORAGE ..............CUSTOMER RESPONSIBILITIES ..... 3, 16-19 WARRANTY ..............TROUBLESHOOTING ..........27-28 TRACTOR ACCESSORIES .......... REPAIR PARTS - TRACTOR ......... 30-47 ASSEMBLY .............. 7-10 REPAIR PARTS - ENGINE ........
Page 185
ACCESSORIES AND ATTAC ENTS These accessories and attachments were available through most Sears retail outlets and service centers when the tractor was purchased. Most Sears stores can order these items for you when you provide the model number of your tractor. MAINTENANCE ENGINE SPARK PLUG...
Page 186
CONTENTS OF HARDWARE PACK Parts Bag contents shown full size Parts packed separately in carton (1) Shoulder Bolt 5/16-18 (1) Knob Seat Video Steering Cassette Wheel (1) Washer 17/32 x 1-3/16 x 12 Ga. Mulcher Plate Parts Bag Manual (3) Retainer Springs (double loop) Parts bag contents not shown full size...
Page 187
ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. the correct tools as necessary to insure proper tightness. TOOLS REQUIRED FOR ASSEMBLY STEERING...
Page 188
ASSEMBLY HOW TO SET UP YOUR TRACTOR INSTALL SEAT (See Fig. 3) Adjust seat before tightening adjustment knob. CONNECT BATTERY (See Fig. Remove cardboard packing on seat pan. CAUTION: Do not short battery termi- Place seat on seat pan and assemble shoulder bolt. nals.
Page 189
ASSEMBLY INSTALL MOWER DRIVE BELT Place the R.H. suspension arm on outward pointing deck pin. If necessary, rock and raise front of mower (See Figs. 4 and 7) to align deck pin with the hole in suspension arm. Be sure tractor is on level surface and mower suspension Retain with double loop retainer spring with loops down as shown.
Page 190
ASSEMBLY iNSTALL MULCHER PLATE (See Figs. 5 and 6) DEFLECTOR SHIELD Install two latch hooks to mutcher plate using screw, washer, lock washer, and weld nut as shown. NOTE: Pre-assemble weld nut to latch hook by inserting weld nut from the top with hook pointing down. Tighten hardware securely.
Page 191
OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. BATTERY CAUTION OR REVERSE FORWARD FAST SLOW WARNING ENGINE ON ENGINE OFF OIL PRESSURE CLUTCH LIGHTS ON LIGHTS OFF FUEL CHOKE MOWER HEIGHT DIFFERENTIAL...
Page 192
OPERATION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR. Compare the illustrations with your tractor to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. IGNITION ATTACHMENT LIGHT SWITCH SWITCH CLUTCH SWtTCH...
Page 193
OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can SAFETYGLASSES result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over the spectacles...
Page 194
OPERATION TO TRANSPORT GAUGE WHEEL Raise attachment lift to highest position with attach- MOUNTING ment lift control. BRACKET When pushing or towing your tractor, be sure gearshift lever is in neutral (N) position. • Do not push or tow tractor at more than five (5) MPH. NOTE: To protect hood from damage when transporting 3/8 WASHER your tractor on a truck or a trailer, be sure hood is closed and...
Page 195
OPERATION • Pull choke control out for a cold engine start attempt. • Do not mow grass when it is wet. Wet grass will plug For a warm engine start attempt the choke control may mower and leave undesirable clumps. Allow grass to not be needed.
Page 196
CUSTOME RESPONSI ILITIES MAINTENANCE SCHEDULE FILL IN DATES AS YOU COMPLETE REGULAR SERVICE SERVICE DATES Check Brake Operation Check Tire Pressure Check for Loose Fasteners Sharpen/Replace Mower Blades Lubrication Chart Check Battery Level/Recharge Clean Battery and Terminals CheckTransaxle Cooling Adjust Blade Belt(s) Tension Adjust Motion Drive Belt(s) Tension _lmuw_Bm Check Engine Oil Level...
Page 197
CUSTOMER RESPO IBILITIES TRACTOR TO SHARPEN BLADE (See Fig. Always observe safety rules when performing any mainte- Care should be taken to keep the blade balanced. nance. unbalanced blade will cause excessive vibration and even- tual damage to mower and engine. BRAKE OPERATION •...
Page 198
C STOMER RESPONSIBILITIES V-BELTS OIL FILL CAP/DIPSTICK Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear. TRANSAXLE COOLING Keep transaxle free from build-up of dirt and chaff which can restrict cooling.
Page 199
CUSTOMER RESPONSIBILITIES CLEAN SCREEN (See Fig. IN-LINE FUEL FILTER (See Fig. Air screen must be kept free of dirt and chaff to prevent The fuel filter should be replaced once each season. If fuel engine damage from overheating. Clean with a wire brush filter becomes clogged, obstructing fuel flow to carburetor, or compressed air to remove dirt and stubborn dried gum replacement is required.
Page 200
VICE AND ADJUSTMENTS A" CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: Depress clutch/brake pedal fully and set parking brake. Place gearshift lever in neutral (N) position. Place attachment clutch in "DISENGAGED" position. ® Turn ignition key "OFF" and remove key. Make sure the blades and all moving parts have completely stopped.
Page 201
SERVICE AND ADJUSTMENTS BOTH FRONT LINKS MUST BE EQUAL IN LENGTH BOTTOM EDGE BOTTOM EDGE OF MOWER TO OF MOWER TO GROUND GROUND GROUND NUT "E" FIG. 20 SUSPENSION TRUNNION FIG, 23 MFT LINK ADJUSTMENT TO REPLACE MOWER DRIVE BELT FIG, 2! MOWER DRIVE BELT REMOVAL (See Fig.
Page 202
SERVICE AND ADJUSTMENTS TO REPLACE MOWER BLADE DRIVE BELT ADJUST ATTACHMENT CLUTCH (See (See Fig. 25) Fig. 26) The electric clutch should provide years of service. Park the tractor on level surface. Engage parking brake. clutch has a built-in brake that stops the pulley within 5 •...
Page 203
VICE AND ADJUSTMENTS TO REPLACE MOTION DRIVE BELT (See Fig. 28) LOCKNUTS Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest. Remove mower (See "TO REMOVE MOWER" in this CENTER section of this manual.) •...
Page 204
SERVICE AND ADJUSTME TO START ENGINE WITH A WEAK BATTERY TO REPLACE HEADLIGHT BULB • Raise hood. (See Fig. 32) • Pull bulb holder out of the hole in the backside of the grill. CAUTION: Lead-acid batteries gener- ate explosive gases.
Page 205
SERVICE AND ADJUSTMENTS ENGINE ACCELERATION TEST - • Move throttle control lever from slow (_m.) to fast (,_) ADJUST THROTTLE CONTROL CABLE position. If engine hesitates or dies, turn idle mixture (See Figs. screw out (counterclockwise) 1/8 turn. Repeat test and 34 &...
Page 206
STORAGE Immediately prepare your tractor for storage at the end of ENGINE the season or if the tractor will not be used for 30 days or more. FUEL SYSTEM IMPORTANT: IT IS IMPORTANT PREVENT CAUTION: Never store the tractor with DEPOSITS FROM FORMING...
Page 207
TROUBLESHOOTING POINTS PROBLEM CAUSE CORRECTION Will not start Out of fuel. Fill fuel tank. Engine not "CHOKED" properly. See "TO START ENGINE" in Operation section. Engine flooded. Wait several minutes before attempting to start. Bad spark plug. Replace spark plug. Dirty air filter.
Page 208
T OUBLESHOOTING POINTS CAUSE PROBLEM CORRECTION Faulty operator-safety presence control system. Check wiring, switches and connections. If not Engine continues to run corrected, contact an authorized service center/ when operater leaves seat! with attachment clutch department. engaged Poor cut - uneven Worn, bent or loose blade.
Page 222
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 MOWER LiFT 1718...
Page 223
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 MOWER LiFT PART DESCRIPTION 136971 WireAsm., Inner w/plunger 136968 Shaft Asm Lift 138284 Pin Groove 12000002 E Ring #5133-62 19211621 Washer 21/32XlX21 120183X Bearing Nylon 125631X Grip Handle Fluted 122365X Button, Plunger 122512X Spring Cprsn 139865...
Page 224
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 MOWER DECK 33 _:_...
Page 225
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 MOWER DECK PART PART DESCRIPTION DESCRIPTION 156948 144917 Housing, Mower 46" Pulley, Idler, Driven 138457 137273 Bracket Asm., Sway Bar Spring, Secondary 44/46/50 Vent STD624008 17490620 Retainer Spring Screw, Thdroll 3/8-16 x 1-1/4 Tytt 130832 Arm, Suspension, Rear (Sway Bar) 122052X...
Page 226
REPAIR PARTS TRACTOR - = MODEL NUMBER 917,258680 PEERLESS TRANSAXLE - MODEL NUMBER 930-057A 68 34...
Page 227
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 PEERLESS TRANSAXLE - MODEL NUMBER 930-057A REF PART REF PART DESCRIPTION NO. NO. DESCR_PTION 772108A Cover, Transaxle 792075 Locknut 5/16-24 Holder, Brake Pad 780086A Bearing, Needle 790025 770102A Case, Transaxle 786066 Spacer 776260A Shaft, Counter 786086...
Page 228
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 AIR INTAKE BAFFLES AND SHROUD 0--5 BREATHER AND VENT ! --11 !7 / /'_...
Page 229
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE = MODEL NUMBER MV18S, TYPE NUMBER PS58560 AIR INTAKE BAFFLES & SHROUD PART DESCRIPTION KEY PART DESCRIPTION 52-063-41 X-276-7 Wing Nut 1/4-20 Baffle, #2 Cylinder Head 52-755-83 Kit, Cover and Tube 52-313-05 Grommet (2) 52-063-42...
Page 230
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 CRANKCASE ° t 19.2°\ ,,_2_=6 / CARBURETOR 0--32 -- 34 _---...
Page 231
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 CARBURETOR CRANKCASE PART DESCRIPTION PART DESCRIPTION X-82-2 Nut, Hex 5/16-18 (12) 52-041-09 Gasket, Intake (2) Kit, Manifold 52-468-12 Washer, Flat 5/16 (12) 52-755-91 (Includes Key Numbers 3 thru 8) 82-755-16 Kit, #1 Cylinder Barrel...
Page 232
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 CTL,.OER,EAO CRANKSHAFT DiPSTiCK ELECTRIC STARTER EXHAUST...
Page 233
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 CRANKSHAFT ELECTRIC STARTER PART DESCRIPTION PART DESCRIPTION 52-014-93 Crankshaft 52-098-!2 Starter Assembly 52-468-03 Washer, Thrust .119/.122 (A.R.) (Includes Key Numbers 4 thru 9) 52-468-04 Washer, Thrust .128/.
Page 234
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE = MODEL NUMBER MV18S, TYPE NUMBER PS58560 GOVERNOR FUEL PUMP _'_"_ 18 19_ IGNITION FLYWH EEL 8--3...
Page 235
REPAIR PARTS TRACTOR - - MODEL NUMBER 917,258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 FUEL PUMP FLYWHEEL PART DESCRIPTION PART DESCRIPTION Screw, Pozidriv, Truss Head 25-162-01 Screen, Grass 47-086-08 1/4-20 x 5/8 (2) 25-086-21 Screw, Hex Washer Head 52-559-01 Pump, Fuel Assembly 1/4-20 x 5/8 (4)
Page 236
REPAIR PARTS TRACTOR -- MODEL NUMBER 917.258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 OIL FILTER OIL PAN _ 3__4 OIL SWITCH] PISTON AND ROD OIL PUMP CAMSHAFT VALVES @-°...
Page 237
REPAIR PARTS TRACTOR - - MODEL NUMBER 917.258680 KOHLER ENGINE - MODEL NUMBER MV18S, TYPE NUMBER PS58560 LOW OIL PRESSURE SWITCH OIL PAN PART DESCRIPTION PART DESCRIPTION X-75-23 Plug, Pipe 1/8 N.P.T.F. X-67-64 Screw, Hex Washer Head #10-32 x 7/16 (2) 52-050-03 Filter, Oil Pickup CAMSHAFT...
Page 239
SUGGESTED GUIDE FOR SiGHTiNG SLOPES FOR SAFE OPERATION ONLY RiDE UP AND DOWN HILL, NOT ACROSS HiLL SiGHTiNG GUIDE SBGHT AND HOLD THiS LEVEL WiTH SKY LINE OR TREE. ili_ Operate your Tractor up and down the face of slopes (not greater than...
Page 240
CRI:IF rZMI:IN® 18.0 HP ELECTRIC START 46" MOWER 6 SPEED TRANSAXLE LAWN TRACTOR MODEL NO. Each tractor has its own model number. Each engine has its own model number. 917.258680 The model number for your tractor will be found on the model plate located under the seat.