Craftsman 14927 Operator's Manual page 4

Items Needed:
Drawer 4" (Qty: 1)
Drawer 9" (Qty: 1)
Drawer 12" (Qty: 1)
Slide (Qty: 6)
#8-32 x 3/8" Screw (Qty: 12)
#8-32 Keps Nut (Qty: 12)
Process:
• Separate slide parts. (See drawer removal instructions.)
iorkbench Slide
Drawer Slide
Figure 3
Items Needed:
#8-32 x 3/8" Self-tapping Screw (Qty: 12)
Process:
• Install (6) Workbench Slides on workbench frame, as
shown, using (2) #8-32 x 3/8" Self-tapping Screws in
each slide.
Workbench top removed for clarity.
Y
/
Workbench Slide
Screw
• Attach (2) Drawer Slides to each drawer (C, D, and E)
using (20) #8-32 x 3/8" Screws, and (20) #8-32 Keps
Nuts as shown.
• Wrench tighten.
NOTE: Drawers may be organized in several
configurations, below is the slide positioning
for the recommended drawer configuration.
Figure 3.1
Drawer Slide
D rawe r
Keps Nut
F
R
0
N
T
Figure 4.1