Mounting The Jointer/Planer - Craftsman 113.232210 Owner's Manual

MOUNTING THE JOINTER/PLANER
1.:From the loose parts find three (3) 3/8-t6 x 3/4" hex
head bOlts, and three (3) 3/8 internal lock washers.
2: Place the teg set on top of the jointer!planer and
align the three (3) mounting holes on the bottom
side of the jointer/ptaner with the holes in the leg
set (see illustration).
3. Place a lock washer on each bolt. Using your fingers,
screw the bolts through the leg set holes and into
the mounting holes in the jointer/planer. Tighten the
bolts securely using a 9/16 inch wrench.
4. Using a 7/16" socket wrench tighten all nuts and
bolts that hold the leg set together.
5. Get another person to help you turn the jointer right
side up so the leveling feet are against the floor.
HEX HEAD
BOLT
INTERNAL
LOCKWASHER
I
) '
>
15