Table of Contents
Advertisement
!:i! !ii!i i
¸I!! ii/! i ill !
!
H
YEAR WARRANTY
ON CRAFTSMAN
STATIONARY
TOOL
ie toa defect in material or workmanship
within one year from the date
purchasei
CONTACT
THE NEAREST SEARS SERVICE
CENTER
iN THE UNITED
STATES
and
: Sears will repair it, free of charge,
This warranty applies only while this prodUct is in the United States.
this jointer/planer
is used for commercial or rental purposes, this warranty will apply for ninety
days from the date of purchases.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to statei
Sears, Roebuck and Co., D/817 WA Hoffman Estates, IL 60179
Safety instructions
For Jointer/Planer
....
Safety is a combination of common sense, staying alert and knowing how your jointer/planer
works. Read this manual
to understand this tool.
J ±J .....
-==-..-Juu--=__
i_
_
iiiii,
i
Safety Signal
Words
WARNING: means if the safety information
is not followed
DANGER: means if the safety information is not followed
someone could be seriously injured or killed.
someone will be seriously injured or killed.
CAUTION: means if the safety information
is not followed
someone may be injured.
,
u
.......
Before Using the Jointer/Pianer
WARNING:
To avoid
mistakes
that could cause
serious, permanent injury,
do not plug the jointer/
planer in until the following steps have been satis-
factorily
completed.
Know and Understand the JointertPlaner
* Completely assemble and align jointer/planer.
Z
. Learn the use and function
of the ON-OFF switch,
_.
fence slide locking handle, cutter guard; depth of cut
hand wheel. Iocks and stops, fence bevel lock handle,
outfeed table, infeed table and hold-down/push-blocks.
<_
• Review and understand
all safety instruCtions and
operating procedures in this manual.
'.....
• Review
the
maintenance
methods
for this jointed
planer.
When Installing
Or Moving the Jointer/Pianer
Avoid Dangerous Environment.
• Use the jointer/planer in a dry, indoor place protected
from rain
° Keep work area well lighted.
To avoid injury from unexpected
jointer/planer
move-
ment.
• Bolt or clamp the jointeriplaner
to firm level surlace
where there is plenty of room for moving the workpiece
through the entire cut.
- Support the jointer/planer
so the tables are level and
the jointer/planer does not rock.
• Put the iointer/planer
where
neither
operators
nor
bystanders
must stand in line with the wood while
planing or jointing it.
, Find and read the warning label found on the jointeri
planer (shown below).
-To avoid injury from electrical shock, make sure your
fingers do not touch the plug's metal prongs when
plugging in or unplugg{ng the jointer/planer.
• Turn off and unplug the jointer/planer before moving it
to a new area. To avoid back injury, get help when you
need to lift or move the jointedplaner.
-Bolt the jointer/planer
to the floor if it tends to slip,
walk
slide or tip over. Be especially
aware of move-
ment when jointing/planing long heavy boards.
° Never Stand On Tool. Serious injury could occur if the
tool tips or you accidentally hit the cutter head. Do not
store anything above or near the tool where anyone
might stand on the tool to reach them,
2
Hide quick links:
Advertisement
Table of Contents
