Troubleshooting - Canon EOS REBEL XS Instruction Manual

Troubleshooting Guide
if there is a problem, first refer to this Troubleshooting Guide. If this
Troubleshooting Guide does not resolve the problem, contact your
dealer or nearest Canon Service Center.
® The battery is not properly installed in the camera. (p.26)
® Recharge the battery. (p.24)
® Make sure the battery compartment cover is closed. (p.26)
® Make sure the card slot cover is closed. (p.31)
® Press the <DISR> button. (p.42)
The access lamp still blinks even when the power switch is
set to <OFF>:
® If the power is cut off while an image is being recorded to the card, the
access lamp will light/blink for a few sec. After the image is recorded to
the card, the camera turns off automatically.
The battery becomes exhausted quickiyo
® Use a fully-charged battery. (p.24)
® The rechargeaMe battery will degrade after repeated use. Purchase a
new one.
The camera turns off by its®if.
® Auto power off is in effect. If you do not want auto power off to take
effect, set the [t_ ° Auto power off] menu to [Off].
® Even if [_'_" Auto power off] has been set to [Off], the LCD monitor will
turn off after the camera is idle for 30 min. Press the <DtSR> button to
turn on the LCD monitor.
172