Image Adjustment - Sanyo PLC-WR251 - True WXGA Projector Owner's Manual

Image Adjustment

1
Press the MENU button to display the On-Screen
Menu. Use the Point
▲▼
adjust and then press the Point ► or the SELECT
button.
2
Use the Point buttons select the desired item
▲▼
and then press the SELECT button to display the
adjustment dialog box. Use the Point ◄► buttons to
adjust the setting value.
Contrast
Press the Point ◄ button to decrease the contrast; press
the Point ► button to increase the contrast (from 0 to 63).
Brightness
Press the Point ◄ button to decrease the brightness; press
the Point ► button to increase the brightness (from 0 to 63).
Color
Press the Point ◄ button decrease the intensity of the color;
press the Point ► button increase the intensity of the color
(from 0 to 63).
Tint
Press the Point ◄► buttons to adjust the tint value to get a
proper color balance (from 0 to 63).
Color temp .
Use the Point ◄► buttons to select the desired Color temp.
level (XLow, Low, Mid or High).
White balance (Red)
Press the Point ◄ button to lighten red tone; press the Point
► button to deepen red tone (from 0 to 63).
White balance (Green)
Press the Point ◄ button to lighten green tone; press the
Point ► button to deepen green tone (from 0 to 63).
White balance (Blue)
Press the Point ◄ button to lighten blue tone; press the
Point ► button to deepen blue tone (from 0 to 63).
Note:
• When the White balance Red, Green, or Blue is adjusted, the Color temp. level will change to User.
• Tint cannot be selected when the video system is PAL, SECAM, PAL-M or PAL-N (p.39).
• When Blackboard(Green) or Colorboard is selected in Image select, Color temp . will change to
Blackboard or Colorboard.
buttons to select the Image
Image adjust Menu
Selected Image mode
Use the Point
buttons to adjust the
setting value.
Video Input
◄►
41