Video Input; Input Source Selection (Video, S-Video) - Sanyo PLC-WR251 - True WXGA Projector Owner's Manual

Video Input

Input Source Selection (Video, S-video)

Direct Operation
Choose Video or S-video by pressing the INPUT button on
the top control or the VIDEO button or the S-VIDEO button
on the remote control.
Before using INPUT button, correct input source should be
selected through menu operation as described below.
Remote Control
COMPUTER 2 can not be selected when using the COMPUTER IN 2/

MONITOR OUT terminal as MONITOR OUT output.
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
2
Use the Point
▲▼
S-video and then press the SELECT button.
When video input signal is connected to the
Video
VIDEO jack, select Video.
When video input signal is connected to the S-
S-video
VIDEO jack, select S-video.
Note:
When the Input Search function is set to On1 or On2 in
the Auto setup function, the input signal will be searched
automatically (p.45).
VIDEO button
Video
S-VIDEO button
S-video
buttons to select Input and
▲▼
the SELECT button.
► or
buttons to select either Video or
Top Control
INPUT button
Input Menu
Computer 1
Computer 2

HDMI
Video
S-video
7