Sanyo PLC-WR251 - True WXGA Projector Owner's Manual page 36

Computer Input
Custom
Adjust the screen scale and position manually with this
function.
Press the Point ► button at Custom and the Custom is
displayed on the screen, you can use the Point ▲▼ buttons
to choose the item you want to adjust.
Scale H/V .......... Adjust the Horizontal/Vertical screen
scale.
H&V ................... When set to On, the aspect ratio is fixed.
Scale V appears dimmed and becomes
unavailable. Adjust Scale H, then the
screen scale is automatically modified
based on the aspect ratio.
Position H/V ..... Adjust the Horizontal/Vertical screen
position.
Common ........... Save the adjusted scale to all the inputs.
Press the SELECT button at Common
to display a confirmation box. To save
the scale, press the SELECT button
at yes. When Custom is selected, the
saved scale is used.
Reset ................. Reset the all adjusted values. Press
the SELECT button at Reset to display
a confirmation box. To reset, press the
SELECT button at yes.
For zooming in and out the images
Digital zoom +
Select Digital zoom +. The On-Screen Menu disappears
and D . zoom + appears. Press the SELECT button to
expand the image size. Use the Point
the image. The Panning function can work only when the
image is larger than the screen size.
A projected image can be also expanded by pressing the
D.ZOOM button on the remote control.
+
Digital zoom -
Select Digital zoom -. The On-Screen Menu disappears
and D . zoom – appears. Press the SELECT button to
compress image size.
The projected image can be also compressed by pressing
the D.ZOOM button on the remote control.
-
To exit the Digital zoom +/– mode, press any button except
the D.ZOOM buttons, SELECT and Point buttons.
+/-
To return to the previous screen size, select a screen size
from the Screen Size Adjustment Menu or select an input
source from the Input Source Selection Menu (see pages
27-28) again or adjust the screen size with the D.ZOOM
buttons.
6
buttons to pan
▲▼◄►
+/-
Note:
• When no signal is detected, Normal is set
automatically and the Aspect dialog box
disappears.
• The adjustable range for Scale H/V and
Position H/V is limited depending on the input
signal.
Remote Control
Note:
• The panning function may not operate properly if
the stored Mode in the PC adjust Menu is used
(p.32).
• The minimum compression ratio is limited
depending on the input signal, when the
Keystone function is working or when the
custom is selected for the screen size.
• True, Full and Digital zoom +/– cannot be
selected when 480i, 575i, 480p or 575p is
selected in the PC System Menu (p.29).
• Digital zoom +/- cannot be selected when Full
or True is selected.
• When Custom is selected, the Digital zoom -
function is disabled.
0
0
Off
0
0
POINT buttons
SELECT button
D .ZOOM + button
D .ZOOM - button