Operation Of Monitor; Basic Set-Up - Hitachi PDV314 Instruction Manual

18. Bookmark – Press to store the desired point to a Bookmark.
19. Repeat – Press to repeat a Chapter, Track Title, or All content.
20. A-B – Press to mark a segment to repeat between A and B.
21. PBC – Press to switch the PBC on or off (only for VCD).
22. Search – Press to select the desired title, chapter or time search.
23. Slow – Press to start slow forward or slow rewind.
24. Clear – Press to clear the unwanted digits which you entered.
25. Screen – Press to reverse the screen display upside down.
26. 0-9 – Press to input information such as chapter numbers, track number, or to make selections on some
screens.
Monitor used with main unit
1. Connect monitor and main unit with DIN cable.
2. Slide the OFF/ON button to ON, the monitor will switch on and start to display the picture.
3. Slide the Volume to adjust the Volume up or down.
Monitor used separately ( not connect to main unit )
1. Connect the AV cable to monitor and your DVD / VCD.
2. Connect the AV adaptor or car adaptor to DC IN jack.
3. Slide the OFF/ON button to ON, the monitor will switch on and start to display the picture.
4. Press MENU button repeatedly, then "BRIGHT", "CONTRAST", "COLOR" and "TINT" will be displayed on the
screen.
5. To adjust BRIGHT, CONTRAST, COLOR or TINT, press ADJ + or ADJ -
6. Slide the Volume to adjust the Volume up or down.
Preparing the Remote Control
1. Remove the plastic protecting sheet before use.
2. Operation angle : about + / - 30 degree in each the direction of the front of the IR sensor.
Usage of Adapter
1. The player is supplied with an AC/DC adapter.
2. Connect the AC/DC adapter to the DC power in jack at the side of the DVD player.
3. Plug the AC/DC adapter into a household power outlet.
REMOTE CONTROL

OPERATION OF MONITOR

BASIC SET-UP

- 14 -