Table of Contents
Advertisement
Adjusting the TV system
Before viewing the Video Disc DVD or VCD, ensure that the set is switched to corresponding
PAL or NTSC system of your TV set. If your TV set is a Multi-System TV, we suggest that it is set at AUTO mode.
Loading a disc
1. Press OPEN, the door lid will open.
2. Load a disc with the label side facing up.
3. Close the door lid.
Playing a DVD disc
1. Slide the ON/OFF button to ON,the unit will switch on and start to play the disc,then a menu will appear on
the display.
2. Press these direction key UP
key to confirm selection and system to start playback.
3. To interrupt playback, press
4. Skip forward, or skip backward a chapter by pressing
next or previous chapter.
5. Press
/
to search a passage fast forward or reverse.
6. During fast forward or backward, press
7. In playback mode, press SEARCH and then enter the desired TITLE or CHAPTER number by number
key, finally press OK key to confirm your selection.
8. Pressing the SLOW key in playback mode will enable you to watch your desired disc in slow motion.
Press the SLOW key repeatedly for different speeds.
9. Press STOP
once, the player will go to Resume Stop mode. In this condition press the
film will resume playback from the point where it was stopped. If STOP
the player will go to stop mode. When
Playing a VCD disc
1.
Slide the ON/OFF button to ON,the unit will switch on and start to playback.
2.
To interrupt playback, press
3.
Skip forward, or skip backward a chapter by pressing
the next or previous chapter.
4.
During fast forward or backward, press
5.
Pressing the SLOW key in playback mode will enable you to watch your desired disc in slow motion.
Press the SLOW key repeatedly for different speeds. "
6.
Press STOP
key to stop playback.
Notes :
-
In " PBC ON " mode, you could use number keys to select the desired chapter for playback directly.
-
To toggle " PBC ON " or " PBC OFF " , press TITLE button on the remote control.
Playing a CD, CD-G disc
1. Slide the ON/OFF button to ON,the unit will switch on and start to playback from the first track.
2. To interrupt playback, press
3. To stop playback, press
CD / DVD / VCD / MP3-CD
/ DOWN
/ LEFT
during disc playback.Press
the disc will resume normal playback.
is pressed the disc will start from the beginning of the disc.
again during disc playback.
the disc will resume normal playback.
again during disc playback.
STOP.
/ RIGHT
to start the menu items,then press OK
again to resume the playback.
/
, each press will jump to the beginning of the
/
, each press will jump to the beginning of
- 22 -
key and the
is pressed again in Resume mode,
Advertisement
Table of Contents
