Remote Control Operation Range; Charging The Battery - Hitachi PDV342E Instruction Manual

7” portable dvd player
Table of Contents

Advertisement

Remote Control Operation Range

Point the remote control at the unit no
more than 5 metres from the remote
control sensor and within 60° of the front
of the unit. The operating distance may
vary depending on the brightness of the
room
GB

Charging the Battery

1. Connect the DC IN jack to power via
supplied mains adapter.
• The LED indicator lights up red
indicating the battery is in charging
mode. When the battery is charged
to full capacity, the LED indicator
goes off.
2. Remove the mains adapter. The
battery is now ready for use.
• The battery is partially charged at shipment. Charge the battery to full for the first time
use and when the low battery (
hours at fully charged.
• Battery will not charge when the DVD player is switched on the power. Turn off the
power to charge the battery.
14
) indication appears on the screen. It takes about 4
30°
30°
Within about 5m
To the mains socket

Advertisement

Table of Contents
loading

Table of Contents