EPSON EPL-N1600
1.4.5 OTHER SPECIFICATIONS
This section presents information related to product distribution and
handling.
1.4.5.1 Jumper Settings
The main control circuit board of this printer (C258MAIN) includes four
jumper switches. Set the switches in accordance with product
destination, as follows.
Table 1-17. C258MAIN Jumper Settings
Jumper
Standard *1
RJ1
Installed
RJ3
Not installed
RJ4
Not installed
RJ5
Installed
RJ6
Not installed
RJ7
Not installed
RJ8
Not installed
RJ9
Not installed
RJ10
Not installed
RJ11
Installed
RJ12
Not installed
RJ13
Installed
RJ14
Not installed
JP2
1 - 2 pin connected
JP3
Connected
NOTE: *1:Applicable for all destinations except for Latin America
and Russia.
Rev. A
Latin America
Russia
Installed
Installed
Not installed
Not installed
Not installed
Not installed
Not installed
Installed
Installed
Not installed
Not installed
Not installed
Not installed
Not installed
Not installed
Not installed
Not installed
Not installed
Installed
Installed
Not installed
Not installed
Installed
Installed
Not installed
Not installed
1 - 2 pin connected
1 - 2 pin connected
Connected
Connected
1.4.5.2 Program-ROM Specifications
The printer's control program is provided on a ROM board which
mounts into the ROM-DIMM slot on the main board. The printer will
include one of the ROM boards indicated in the table below.
Table 1-18. Program ROM Specification
Name
No.
Board Subassembly
C215PROG
Board Subassembly
C258PROG
Specifically, the ROM board will be flash-type during initial mass
production (so that it can be updated locally), but will be changed to
mask-ROM type when production stabilizes.
At start of mass production:
When production becomes stable:
The C215PROG board (flash ROM) can be updated using the printer's
"progarm-ROM update" feature. Refer to Chapter 5, "Adjustments," for
more information.
Chapter 1
Product Description
Specification
• Flash PROM
• 8Mbit x 4 (IC 3/4/5/6)
• Mask ROM
• 16Mbit x 2 (IC 1/2)
C215PROG board
C258PROG board
34