Roll Assembly Feed - Epson EPL-N1600 Service Manual

EPSON EPL-N1600

4.3.7 Roll Assembly Feed

1. Remove the Cover Side,E. (Section 4.2.1)
2. Remove the Control Assembly Panel (E). (Section 4.2.3)
3. Remove the Cover Assembly MBF.E.(Section 4.2.4)
4. Remove the Tray Assembly MBF.E.(Section 4.2.5)
5. Remove the Cover Assembly,E. (Section 4.3)
6. Remove the C258MAIN Board.(Section 4.3.49)
7. Remove the Shield Assembly Bottom (E).(Section 4.3.44)
8. Remove the PWBA Hotaru.(Section 4.3.48)
9. Remove the Chassis Assembly PS. (Section 4.3.46)
10. Set the printer on the rear surface.
11. Press the Roll Assembly Feed to slide it to the right on the shaft.
12. Press on the flat side of the Roll Assembly Feed away from the
shaft.
Rev. A
Chapter 4 Disassembly and Assembly
Figure 4-13. "Roll Assembly Feed" Removal
4-116