Playing Back Single Clips - Panasonic AG-HPD24PJ Operating Instructions Manual

• When playback stops, the cursor moves to the clip played prior
to stopping.
• Video and audio playback may be disrupted between clips in
different video formats (1080i, 720p) or compression formats
(DVCPRO HD, DVCPRO50, DVCPRO, DV, AVC-Intra 50 and
AVC-Intra 100).
• If continuous playback is performed with clips whose video
format is the same but whose audio bit depth is different, the
audio is muted between clips.
• When a 24-bit audio clip is played back in a playback mode
other than the normal mode using the PLAY
audio bit depth becomes 16-bit.
• Changing the thumbnail screen to text memo display makes it
possible to start play back from text memo location.
(➝ "Playing back from text memo location" This page)
• You can select the location from which the thumbnail starts
playback by selecting the SETUP - THUMBNAIL - PB POSITION
menu setting.
(➝ Setup Menu "THUMBNAIL" - "PB POSITION" page 57)

Playing Back Single Clips

When ONE CLIP PLAY is assigned to a USER button, the
USER button allows you to play back the clip at the cursor
location.
◆ NOTE:
• The thumbnail screen appears when playback stops at the end of
the clip or when the STOP
moves to the next clip.
• All buttons other than the STOP
single clip playback.
• Single clip playback starts from the position specified on the PB
POSITION menu setting.
• When JOG/VAR/SHTL is used to display a still image during
playback from the thumbnail screen, the USER button to which ONE
CLIP PLAY has been assigned allows you to play the entire clip to
its end from the still image.
(➝ Setup Menu "USER BUTTON" page 70)
Using variable speed playback and frame-
by-frame playback
These functions operate in the same manner as in the record/
playback screen.
(➝ "Variable speed playback" page 8, "Frame-by-frame
playback" page 8)
button, the
button is pressed. The cursor then
button are not available during
Playing back from text memo location
1
Open the thumbnail screen.
2
Press the MENU button to select the THUMBNAIL -
TEXT MEMO CLIPS menu setting.
Thumbnails of clips with text memos appear at the top of
the LCD monitor. Information on the selected clip text
memo appears in the lower half of the LCD monitor.
Thumbnail Blue indicates selected
display number of text memo clips
and white indicates total
number of text memo clips.
◆ NOTE:
• When a text memo clip for an AVC-Intra clip with a different
SETUP - SYSTEM - FREQUENCY menu setting is displayed, the
icon may appear at the text memo location in the lower half
of the monitor instead of the thumbnail that should normally
appear.
3
Select the clip (with a text memo) you want play back
and press the SET button.
The cursor moves to the lower half of the LCD monitor.
2,3,4
2
4
Indicates still images
included with the text
memos.
The cursor moves.
Main Mode: Thumbnail Screen
15