Playback Connection Example - Panasonic AG-HPD24PJ Operating Instructions Manual

Playback Connection Example

When connecting a 3D monitor for viewing 3D
video, select the signal connector and format to
suit the monitor type or display method. The unit's
output connector and signal format are selected
by the SETUP - VIDEO - OUTPUT SEL menu
setting.
3D Single-Signal Output (Side-By-Side/Frame Packing) Connection Example
AG-HPD24 (Master/3D-L)
DRight-
Side
Playback
Signal
An input
reference
signal can be
connected to
the REF IN jack
on the slave.
AG-HPD24 (Slave/3D-R)
Connect the master and slave units together with
a USB 2.0 cable between the LINK (USB) ports,
an RS-422A/D-SUB9P cable between the LINK
(D-SUB) connectors, and BNC cables between
the synchronizing jacks, as illustrated. With these
connections, setting the units to 3D REC/PB mode
40
3D Signal Recording and Playback: Connections
Video (Composite) Output
ASync Signal C LINK (D-SUB)
OUTPUT SDI OUT Jack
SEL
DISCRETE Discrete left and
L / R right output
SDI (S / S) Side-by-side
(half) method
output
HDMI No output
(S/S)
HDMI (FP) No output
HDMI or
SDI Output
B LINK (USB)
enables 3D playback. The 3D side-by-side or
frame packing (HDMI-only) signal is output from
the master (L) SDI or HDMI output connector, and
3D video can be viewed on the 3D monitor.
HDMI OUT
Port
No output
No output
Side-by-side
(half) method
output
Frame packing
method output
SD Monitor
3D Monitor