Specifications - Canon CANOSCAN D1230 series Service Manual

I. SPECIFICATIONS
CanoScan D1230U
Scanner Main Unit
Type
Scanning Part
Image sensor
Light source
Document type
Document alignment position
Max. document size
Image output mode
Optical resolution
Scanning time
Cropping of scan area
FAU-S12 Scanning Part
Film type
Film size
Light source
Power source
Scanning time
Cropping of scan area
Interface Part
Interface
Operating Part
Start button
COPYRIGHT © 2001 CANON INC. CANOSCAN D1230U/D2400U REV.0 MARCH 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
: Flatbed image scanner
: 10,550-pixel 3-line CCD
: Cold cathode fluorescent lamp
: Sheet, Book
: Right-end corner
: A4/Letter size (216 x 297mm)
: Color14-bit for RGB each (16-bit input)
Grayscale (256 gradations)
Binary (black and white)
: 1200 dpi x 2400 dpi
: 3.60ms/line (600 dpi or lower)
7.20ms/line (601 dpi or higher)
: One rectangular area only
: Color and monochrome, negative and positive
: 35mm sleeve (preview : 3 frames, scan : 1 frame)
35mm slide mount
Brownie (Max. 120x60mm)
4x5 inches
: Cold cathode fluorescent lamp
: Supplied from CanoScan D1230U
: 3.38 to 101.2ms/line (automatically selected depending on
films)
: One rectangular area only
: USB connector (Universal Serial Bus 1.1)
FAU connector (8-pin)
Power connector (for AC adapter)
: 1 each on D1230U and FAU-S12
CHAPTER 1
1 - 1