Led Indication, Outside (Co) Line - Panasonic KXTA308 - ANALOG PBX Installation Manual

L
L
ED Indication, Outside (CO) Line
Description
Flashing light patterns
Condition
Programming References
Feature References
Operation References
3-74 Features
The LED (Light Emitting Diode) indicators of the buttons
associated with outside (CO) lines show the line conditions using a
variety of lighting patterns. This allows the user to see which lines
are idle and which lines are in use. The table below shows the
lighting patterns for different line conditions.
CO Button
Off
Green On
Flashing Green Slowly
Flashing Green
Moderately
Flashing Red Rapidly
Red On
Flashing Red Slowly
Flashing Red Moderately
Flashing slowly
Flashing moderately
Flashing rapidly
• Item with an * is only available on a Single-CO button.
Station Programming . . . . . . . . .
Flexible Button Assignment – Group-CO (G-CO) Button,
Section 3, Features
Button, Group-CO (G-CO) Button, Other-CO (O-CO)
Button, Single-CO (S-CO)
Not applicable.
3
Outside (CO) Line Condition
Idle
The user is using the line.
The user has a held call or Hold Recall
The user has one of the following:
(1) exclusive hold, (2) outside-to-outside (CO-
to-CO) line call, or (3) Conference, Unattended.
Incoming call
Other-use
Other-hold*
Local Carrier-Based Voice Mail Service*
1 s
Other-CO (O-CO) Button,
Single-CO (S-CO) Button
Features
User Manual