Panasonic KXTA308 - ANALOG PBX Installation Manual page 108

D
*10: The DISA Busy Mode is selected in program [506] "DISA Busy Mode". There are two modes as
follows:
• Disconnect – the caller hears a busy tone and the call is disconnected.
• Call Waiting – the destination extension hears the call waiting tone if they have enabled Call
*11: The DISA Ring Timer Before Intercept starts. The destination telephone(s) will ring for the time
programmed in program [508] "DISA Ringing Time before Intercept".
*12: After the Intercept Timer for Internal DISA expires, the system regards that nothing was dialed .
*13: The system treats the call according to program [510] "DISA No Dial Mode" as follows.
• Disconnect – the call is disconnected.
• Intercept – the call is sent to the extensions programmed in programs [408]–[410] "Flexible
*14: The DISA Ring Timer After Intercept starts. The destination telephone(s) will ring for the time
programmed in program [509] "DISA Ringing Time after Intercept". If the call is not answered
during the programmed time, the call will be disconnected.
3-52 Features
Waiting.
Ringing Assignment — Day/Night/Lunch". If all of the extensions are assigned to
"Disable", the call will be disconnected.
3 Features