Setting The Date; Setting Correct Time/Day - Danfoss TP5000 si range Installation And User Instructions Manual

Setting the date

GB
Press and hold Λ and PROG for 3 seconds, to display
date in dd/mm/yy format.
The YEAR number will fl ash, use Λ or V to correct
the year.
Use - or + to move to MONTH, then use Λ or V to
correct month.
Use - or + to move to DATE in month, then use Λ or
V to correct day in month.
If you attempt to select an invalid date the unit software will reject it
and apply the nearest valid date. It is recommended that date is set in
the order, yy/mm/dd.
Setting the correct time
After setting the date press PROG to display the
time. The time display will fl ash on and off .
Use the + and - buttons to set the correct
time (press and hold to change in 10 min.
increments).
Setting the correct day
The day of the week is set automatically. Press
PROG to return to normal operation (RUN).
18