1. Manuals
  2. Brands
  3. ProStart Manuals
  4. Remote Starter
  5. ProStart CT-5460TW
  6. User manual

ProStart CT-5460TW User Manual

2-way remote starter system with full alarm system for manual transmission vehicles
Hide thumbs
Table of Contents

Advertisement

Quick Links

T W O - W A Y
L C D
R E M O T E
S T A R T E R
S Y S T E M
W I T H
F U L L
A A L A R M
S Y S T E M
F O R
M A N U A L
T R A N S M I S S I O N
V E H I C L E S
CT-5460TW
User Guide
The Transmitter's Battery:
Depending on the usage, the transmitter's battery can last between 3 to 6 months. When
the battery is low, the transmitter will emit two "beeps" in a repetitive cycle. At that point
the batteries should be replaces. We recommend keeping a spare battery somewhere
handy such as inside the glove compartment.
WARNING!
Manual transmission vehicles
equipped with a remote starter unit
must always be parked with the
gearshift lever in the NEUTRAL
position and the emergency brakes
must always be applied.
INDUSTRY CANADA USER NOTICE:
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the device.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that
the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication.
FCC USER NOTICE (U.S.A.):
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user's authority to operate the equipment.
DOC: 1.02
DL Fb
March 17, 2006
Manufactured in Canada by Autostart

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ProStart CT-5460TW and is the answer not in the manual?

Questions and answers

Related Manuals for ProStart ProStart CT-5460TW

Summary of Contents for ProStart ProStart CT-5460TW

  • Page 1 NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. DOC: 1.02 DL Fb March 17, 2006 Manufactured in Canada by Autostart...

  • Page 2: Table Of Contents

    Table of Contents Table of Contents ........2 Car Finder ......... 8 Introduction..........3 Safe Start .......... 9 Remote-Starting Your Vehicle ....3 Ignition-controlled Door Locks... 9 Remote-starting......... 3 Ignition Re-lock........9 Vehicle Presets ......... 3 Secure Lock ........9 Driving Off .........

  • Page 3: Introduction

    Introduction This System is a state-of-the-art remote car starter and alarm combo system. The system is packed with advanced features such as priority access to the driver’s door and Car Finder (commodity features), last armed state memory in case of power failure (which ensures that the vehicle remains protected after a power failure recovery) and the Safe Start children safety feature.

  • Page 4: Remaining In Ready Mode

    1. Ensure that all the doors are closed and that the gearshift lever is in the position. NEUTRAL 2. With the engine already running, apply the parking brake and release the brake pedal. Make sure to release the brake pedal. 3.

  • Page 5: Turbo Mode

    To enable Idle Mode: 1. With the engine running, press the button (to unlock the doors) or the LOCK UNLOCK button on the remote control until the parking lights come on. START/STOP 2. Remove the key and exit the vehicle. The engine will go on running. 3.

  • Page 6: Start Attempts Indicator (Valet Mode)

    Note: With the Remote Valet activated, the remote starter and alarm functions will be disabled. Start Attempts Indicator (Valet Mode) This reveals start attempts made while the vehicle was in Valet Mode. The parking lights will: Come , go ; then Flash twice.

  • Page 7: Quick Lockout Tm

    Quick Lockout (Also called Secure Panic.) For fast protection, the system will all doors when you press the LOCK brake pedal while the horn is activated and the system is in Panic Mode. (Quick Lockout is only available when Panic Mode has been activated.) Cold Weather Mode When cold weather mode is active, the engine starts every 2 hours and runs for 4 minutes (or for 9 or 20 minutes with diesel engines).

  • Page 8: Active Or Passive Arming

    The parking lights will flash once and the LED will flash slowly to confirm that the doors have been locked and that the starter kill feature is enabled if it was installed. The horn will give one signal if configured at installation. Active or Passive Arming The alarm and starter kill can be configured either to passive mode (so as to arm automatically) or Active Mode (so as to require user intervention for arming).

  • Page 9: Safe Start

    Safe Start If this feature is enabled, it will require the user to press the button twice within 3 START/STOP seconds to start the vehicle. This will eliminate accidental remote starts (for example, if there are children playing with the transmitter). To stop the vehicle, the user must press once.
  • Page 10 On models where starter kills were installed, pressing the button will LOCK also activate the starter kill. On alarm models, pressing the button will also activate the monitoring. LOCK The Stop Confirmation Was Not Received If after remote stopping the vehicle no confirmation was received i.e.

  • Page 11: L.e.d. Intrusion Codes

    Your installer can customize the system as to personalize these multi-level features in an order that best suits you. Your options are: Option 1: Level 1 Multi car operation (requires pressing the button 1X) FUNCTION Level 2 Basic features (requires pressing the button 2X) FUNCTION Level 3...

  • Page 12: Using The Remote Control

    Using the Remote Control Transmitter may not be exactly as shown. The transmitter offers several command-confirmation and timer features. This section explains some of the key transmitter functions that are available. The following section gives a summary of the button combinations used to access those functions.

  • Page 13: Transmitter Mode Selection

    Transmitter Mode Selection FUNCTION BUTTON PRESSED ICON BUZZER INSTRUCTIONS /DESCRIPTION Press unlock first and then POWER-SAVING press the function button and Melody MODE the lock button simultaneously. VIBRATION MODE Vibrates 4X Press once to switch the Alarm ALARM CLOCK Clock ON Melody MODE ON/OFF Press twice to switch the Alarm...

  • Page 14: Cold Weather Mode

    Cold Weather Mode Function Button pressed Icon Sound Instructions /description 1 Beep for 1 sec Press for 1 second and To enter cold weather mode 1 Beep then press and hold for 3 for 3sec seconds. 1 Beep for 1sec Press for 1 second and To exit cold...

  • Page 15: Lcd Transmitter Operation ( Second Car Control )

    15 minutes 20 minutes 25 minutes 30 minutes LCD Transmitter Operation ( Second Car Control Basic Vehicle Operation FUNCTION BUTTON PRESS ICON BUZZER DESCRIPTION Locks the doors LOCK 1 Beep and arms the Starter Kill (if installed) and the alarm. Unlocks the doors and disarms UNLOCK 2 Beeps...

  • Page 16: Diagnostics - Parking Light Flash Table

    Diagnostics – Parking Light Flash Table Flashes Description Doors locked, Alarm and Starter Kill armed. End of Run Time. button pressed TRUNK Start signal received by the System. Cold Weather Mode cancelled. Doors unlocked, alarm and starter Kill disarmed. Run time cancelled. Exit remote valet.

Table of Contents

Save PDF