Asus P5SD2-VM User Manual page 45

8. Chassis intrusion connector (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or switch.
Connect one end of the chassis intrusion sensor or switch cable to this
connector. The chassis intrusion sensor or switch sends a high-level signal to
this connector when a chassis component is removed or replaced. The signal
is then generated as a chassis intrusion event.
By default , the pin labeled "Chassis Signal" and " Ground" are shorted with
a jumper cap. Remove the jumper caps only when you intend to use the
chassis intrusion detection feature.
P5SD2-VM
P5SD2-VM Intrusion Connector
9. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that
supports either HD Audio or legacy AC`97 audio standard. Connect one end
of the front panel audio I/O module cable to this connector.
P5SD2-VM
P5SD2-VM Front Panel Audio Connector
• We recommend that you connect a high-definition front panel audio module
to this connector to avail of the motherboard's high-definition audio capability.
• By default, this connector is set to HD Audio.
ASUS P5SD2-VM
CHASSIS
(Default)
Azalia-compliant Legacy AC'97-compliant
pin definition
AAFP
pin definition
1-33