Reassembly - Toro 20330 - Low Wheel Walk Power Mower Service Manual

7. Slide the handle up and off (Fig. 232).
8. If you need to replace the traction control rod or
either of the springs, one of the handle guides will
need to be removed. The guides are held on by 2
screws (Fig. 233).
WPM Drive Systems Manual
HANDLES AND CONTROL CABLES
Fig 232 DSC-4819a
Fig 233 DSC-4821a

Reassembly

Reassemble in reverse order.
1. There are 3 bosses on the inside of the guide. The
top and bottom ones receive the mounting screws.
The boss in the photo must line up with the end of
the control rod. This boss keeps the rod from moving
sideways and falling out of the handle (Fig. 234).
2. One end of the springs goes into a hole in the
handle, the other around the traction control rod. The
springs apply pressure to the handle to hold it in the
retracted, upper position (Fig. 235).
Fig 234 DSC-4828a
Fig 235 DSC-4814
7-5