Installing The System Board; Removing The Heat Sink - Dell Vostro 3560 Owner's Manual
Owner's manual
Hide thumbs
Also See for Vostro 3560:
- Service manual (113 pages) ,
- Owner's manual (37 pages) ,
- Setup and specifications (25 pages)
Table of Contents
Advertisement
Installing the System Board
1.
Align the system board to the port connectors and place the system board in the computer.
2.
Tighten the screws to secure the system board to the chassis.
3.
Affix the tape and connect the LVDS and camera cable.
4.
Connect the touchpad cable.
5.
Connect the express card reader cable.
6.
Connect the speaker cable.
7.
Connect the system fan cable and the power cable.
8.
Install the:
a) SD card reader
b) palmrest
c) display hinge cover
d) keyboard
e) hard drive
f) optical drive
g) base cover
h) battery
i)
express card
j)
SD card
9.
Follow the procedures in
Removing the Heat Sink
1.
Follow the procedures in
2.
Remove the:
a) SD card
b) express card
c) battery
d) base cover
32
After Working Inside Your Computer .
Before Working Inside Your Computer.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Vostro 3560 and is the answer not in the manual?
Questions and answers