Table of Contents
Advertisement
Components
Remove the contents from the shipping carton
and set them on a table where they can be
easily identified and located. Check all of the
components in the kit against the following list
to help you become familiar with them. When
you identify a component, place a check
mark ( 3) after it. The KEY numbers corre-
spond to the "Component Illustrations."
IMPORTANT: When you remove the water
valve and flexible tubing from the Styrofoam
packing insert, do not remove the tubing from
the valve. It has been factory-installed and
leak-tested. Do not disturb the compression
nut that connects the tubing to the valve, or
the valve may leak after you connect it to the
water supply.
Do not discard any of the packing material
until you account for all of the components. If
you need to order a replacement part for the
Ice Maker, a replacement parts list is provided
on page 27.
KEY QTY. DESCRIPTION
1
1
Ice maker
2
1
Ice bucket
3
1
Water valve w/tubing
4
1
Fill tube
5
1
Gasket
6
1
Short extension tube
7
1
Long extension tube*
8
2
ice maker clips*
9
2
Tubing clips
10
1
Metal water tube insert
11
1
Water valve tubing clamp
12
4
% ' hex-head sheet-metal screws
13
2
N'hex-head
machine screws
14
2
%' hex-head sheet-metal screws
l
For installation
in Side-By-Side
Models only.
COMPONENT ILLUSTRATIONS
Hide quick links:
Advertisement
Table of Contents
